Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
AKVASTOP

AKVASTOP DV waterstop — internal waterstop for expansion joints

Waterstops and swelling profiles

The DV waterstop is cast into the body of the concrete along the axis of the expansion joint in buried and underground structures: foundations, tunnels, tanks and pools. Rubber profiles DV-170/12, DV-220/25 and DV-270/25 withstand water pressure of 0.47–0.75 MPa, PVC-P profiles from DV-240/20 to DV-500/50 — 0.60–0.85 MPa. The large sizes DV-320/50, DV-400/50 and DV-500/50 accommodate joint tension of up to 120 mm. For environments with petroleum products, an oil- and petrol-resistant PVC-PK-MBS version is available.

Specifications

ManufacturerAKVASTOP — OOO “Akvabarier”
Typewaterstops and swelling profiles
Usefoundations and basements, tunnels and metro, joints and junctions, tanks and pools
Baseextruded profile; material: EPDM rubber, PVC-P
Packagingrubber — coils of 30 linear m; PVC-P — coils of 20 linear m
Application methodinstallation according to technological regulation TR 186-07
Key propertiessizes: rubber DV-170/12, DV-220/25, DV-270/25; PVC-P DV-240/20, DV-320/20, DV-320/30, DV-320/40, DV-320/50, DV-400/50, DV-500/50; permissible water pressure 0.47–0.75 MPa (rubber), 0.60–0.85 MPa (PVC-P); movements (compression/tension/transverse shear/longitudinal shear), mm: DV-170/12 — 7/12/7/3; DV-220/25 and DV-270/25 — 15/25/15/10; DV-240/20 — 14/30/30/15; DV-320/20 — 12/30/30/15; DV-320/30 — 28/70/70/40; DV-320/40 — 28/110/110/55; DV-320/50, DV-400/50, DV-500/50 — 28/120/110/70; materials: EPDM rubber (TU 5772-001-58093526-11): Shore A hardness 70±5, nominal tensile strength at least 7.5 MPa, elongation at least 200 %, brittleness temperature limit not higher than −50 °C, service temperatures −50…+80 °C; PVC-P (TU 5772-001-58093526-11): Shore A hardness 70±5, tensile strength at break at least 10 MPa, elongation at least 320 % (at −20 °C at least 200 %), water absorption not more than 0.25 %, density not more than 1.35 g/cm3, brittleness temperature not higher than −40 °C, combustibility group G4, weldability ≥0.6 (DIN 18541-2), service temperatures −37…+70 °C; PVC-PK-MBS variant (oil- and petrol-resistant, TU 32.99.59-009-58093526-2018): strength at least 10 MPa, elongation at least 300 %, service temperatures −37…+70 °C
Shelf lifestore in closed rooms at a temperature not higher than +30 °C, without deforming loads, direct sunlight, petroleum products and solvents; guaranteed shelf life 2 years from the date of manufacture; guaranteed service life 5 years
Standardswaterstops — TU 5775-02-46603100-03 amend. 1, 2 (extrusion); materials — TU 5772-001-58093526-11 (EPDM rubber, PVC-P)

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by AKVASTOP