AKVASTOP KhV waterstop — internal waterstop for construction joints
Internal waterstop for construction joints in foundations, tunnels and tanks; permissible water pressure up to 0.98 MPa.
The task of the DZS waterstop is to seal the expansion joint where a new structure adjoins an existing one. The profile is U-shaped and made only of PVC-P in two sizes: DZS-140/50-2/40 and DZS-140/100-2/40. Permissible movements are 25 mm in compression, 150 mm in tension, 130 and 95 mm in transverse and longitudinal shear at water pressure of 0.43 MPa; it is supplied in 20 m coils.
| Manufacturer | AKVASTOP — OOO “Akvabarier” |
|---|---|
| Type | waterstops and swelling profiles |
| Use | foundations and basements, tunnels and metro, joints and junctions, leak repair |
| Base | extruded profile; material: PVC-P |
| Packaging | coils of 20 linear m |
| Application method | installation according to technological regulation TR 186-07 |
| Key properties | sizes: DZS-140/50-2/40, DZS-140/100-2/40; movements (compression/tension/transverse shear/longitudinal shear) 25/150/130/95 mm; permissible water pressure 0.43 MPa; materials: PVC-P (TU 5772-001-58093526-11): Shore A hardness 70±5, tensile strength at break at least 10 MPa, elongation at least 320 % (at −20 °C at least 200 %), water absorption not more than 0.25 %, density not more than 1.35 g/cm3, brittleness temperature not higher than −40 °C, combustibility group G4, weldability ≥0.6 (DIN 18541-2), service temperatures −37…+70 °C; PVC-PK-MBS variant (oil- and petrol-resistant, TU 32.99.59-009-58093526-2018): strength at least 10 MPa, elongation at least 300 %, service temperatures −37…+70 °C |
| Shelf life | store in closed rooms at a temperature not higher than +30 °C, without deforming loads, direct sunlight, petroleum products and solvents; guaranteed shelf life 2 years from the date of manufacture; guaranteed service life 5 years |
| Standards | waterstops — TU 5775-02-46603100-03 amend. 1, 2 (extrusion); materials — TU 5772-001-58093526-11 (EPDM rubber, PVC-P) |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Internal waterstop for construction joints in foundations, tunnels and tanks; permissible water pressure up to 0.98 MPa.
Swelling hydrophilic rubber profile for construction joints, precast element joints and utility penetrations; withstands up to 14 atm.
Profile seal for construction joints in diaphragm walls of hydraulic and underground structures; water pressure up to 0.33 MPa.
Internal PVC-P waterstop with a swelling rubber cord for construction joints and floor-to-wall junctions; water pressure up to 0.97 MPa.
Bentonite strip on butyl rubber for construction joints, junctions and utility penetrations; resists water pressure up to 18 atm.
External PVC-P expansion-joint waterstop designed to work together with waterproofing membranes; joint tension up to 120 mm.