Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
VINIKOR-ecoprime-01 — high-build epoxy primer with corrosion inhibitor
VMP

VINIKOR-ecoprime-01 — high-build epoxy primer with corrosion inhibitor

Epoxy primers

A high-build epoxy primer with an amine hardener and a corrosion inhibitor for carbon and stainless steel, aluminium, fibreglass and concrete. It is designed for an industrial atmosphere with aggressive gases and short-term splashing with acids, alkalis and petroleum products; it is used at chemical plants and in shipbuilding and ship repair, and tolerates tightly adhering rust and application down to −10 °C. It serves as a primer under VINIKOR-62, POLITON-UR (UV), VINIKOR-nord enamels, and the system with VINIKOR EP-1155D enamel holds a type approval certificate of the Russian Maritime Register of Shipping.

Specifications

ManufacturerVMP — AO “NPKh VMP”, Yekaterinburg
Typeepoxy primers
Usesteel structures, chemical plants, marine and port structures, concrete
Baseepoxy, two-pack, amine hardener; high-build; contains a corrosion inhibitor
Colourgrey, red-brown and others; smooth matt
Packagingkit: base in metal pails, hardener in metal cans
Application methodairless (nozzle 0.015–0.021″, 15–21 MPa) and air spray, brush, roller; 1–2 coats; base:hardener 100:7.5 by weight; thinners SOLVIN-10, SOLVIN-12, SOLVIN-15 up to 7 % (by weight); induction time after mixing 15–20 min
Application temperaturefrom −10 to +35 °C, relative humidity max. 85 %; surface at least 3 °C above the dew point
Dryingovercoating with enamels — no later than 6 months; drying schedules are given for temperatures from −5 to +35 °C
Key propertiesdensity — 1.4±0.1 g/cm³, pot life at 20 °C — at least 8 h, volume solids — 62±2 %, non-volatile matter by weight (base) — 72–78 %, service temperature — from −60 to +60 °C
Compatible materialsprimer under VINIKOR-62, POLITON-UR (UV) enamels, VINIKOR, VINIKOR-akril, VINIKOR-nord primer-enamels and other vinyl-epoxy, epoxy, acrylic, polyurethane materials; system with VINIKOR EP-1155D enamel (RS); stand-alone coating in the absence of UV radiation
Shelf lifebase — 24 months, hardener — 12 months from the date of manufacture
StandardsTU 20.30.12-002-67503963-2019; state registration certificate RU.78.01.10.008.E.000710.12.21; RS type approval certificate No. 26.44.01.05240.120 (system “VINIKOR-ecoprime 01 – VINIKOR EP-1155D”); RD GM-01-02 (AO “Trust Gidromontazh”); approved by NPO “Lakokraspokrytie”; recommended by AO “Apatit”, AO “Mondi SLPK”, PJSC “AKRON”

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by VMP