Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
VINIKOR-term — heat-resistant silicone primer-enamel up to +600 °C
VMP

VINIKOR-term — heat-resistant silicone primer-enamel up to +600 °C

Heat-resistant coatings

A one-component heat-resistant silicone-based primer-enamel designed for service from −60 to +600 °C. It protects carbon and stainless steel, concrete, reinforced concrete, brick and asbestos at chemical, oil and gas, power and shipbuilding facilities; when heated, the colour and gloss may change without loss of protective properties. It is applied in two coats on its own or over the TSVES-MO ethyl silicate zinc-rich primer; heat curing at a temperature of at least 250 °C for at least 1 h is recommended.

Specifications

ManufacturerVMP — AO “NPKh VMP”, Yekaterinburg
Typeheat-resistant coatings
Usesteel structures, oil and gas, power industry, chemical plants, marine and port structures, concrete
Basesilicone base, one-pack; heat-resistant anticorrosive primer-enamel
Colourblack, silver; matt uniform
Packagingmetal pails and metal cans
Application methodairless spray without thinning (nozzle 0.011–0.019″, 12–19 MPa), air spray, brush, roller; 2 coats; thinners SOLVIN-12, SOLVIN-15, xylene up to 8 % by weight
Application temperaturefrom −15 to +35 °C, relative humidity max. 85 %; surface at least 3 °C above the dew point; temperature of the prepared primer-enamel not below +15 °C
Dryingto degree 3 — no more than 1 h at 20 °C; between coats — at least 1 h at 20 °C; heat curing at no less than 250 °C for at least 1 h is recommended — after holding for at least 24 h at 20 °C and no more than 1 month in the open atmosphere
Compatible materialsstand-alone coating; finish coat over TSVES-MO ethyl silicate zinc-rich primer
Shelf life12 months from the date of manufacture
StandardsTU 20.30.12-016-67503963-2018; state registration certificate RU.77.01.34.008.E.003259.12.21; approved by NPO “Lakokraspokrytie” (Khotkovo), IPKhiS Frishberg

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by VMP