KhS-059 Khimtek — primer based on a vinyl chloride copolymer with epoxy resin
Red-brown primer for railway wagons, tank cars, equipment and structures in acid, alkali, salt and aggressive gas media.
Zn-YARFAST®-0561 is a zinc-rich primer made from a base (zinc powder in an epoxy resin solution) and the Zn-YARFAST® hardener, which are mixed in a ratio of 100:5.9. It is intended for steel structures and works on its own or as a primer in coating systems. After mixing, the composition is left to stand for 30 min; the pot life of the mixture is 12 h. At 20 °C the coating withstands water, 3 % NaCl solution and petrol for at least 72 h.
| Manufacturer | Khimtek — OOO PO “Khimtek”, Yaroslavl |
|---|---|
| Type | zinc-rich primers |
| Use | steel structures |
| Base | Zinc powder in a solution of epoxy resin in organic solvents; base + Zn-YARFAST® hardener |
| Colour | grey |
| Packaging | 25 kg, 60 kg |
| Application method | air or airless spray, brush, roller |
| Drying | standing time 30 min after mixing; pot life of the mixture 12 h |
| Key properties | Base:hardener ratio: 100:5.9 parts, Resistance at 20 °C: water, 3 % NaCl, petrol — at least 72 h, Surface preparation: GOST 9.402 (cleaning degree 2, degreasing degree 1) or Sa 2½ / St 3 |
| Compatible materials | on its own or in coating systems; Zn-YARFAST® thinner up to 5 % |
| Shelf life | 6 months from the date of manufacture; storage from −40 to +40 °C |
| Standards | TU 2312-050-81922626-2020 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Red-brown primer for railway wagons, tank cars, equipment and structures in acid, alkali, salt and aggressive gas media.
Petrol- and oil-resistant primer-enamel for equipment and products made of ferrous metal and cast iron, including engines, at temperatures up to 130 °C.
Primer-enamel for steel, aluminium and galvanised surfaces, including the inside of metal tanks for water and petroleum products.
One-component alkyd-urethane enamel for metal, concrete and reinforced concrete surfaces in an open industrial atmosphere.
Organosilicon enamel for steel structures, equipment, facades and porous surfaces; the silver enamel withstands up to +300 °C.
Two-component primer-enamel for steel structures, external surfaces of petroleum product tanks and containers, forced and ambient drying.