YARFAST®-0111B primer-enamel — thixotropic, applied in a single coat
Thixotropic quick-drying primer-enamel for steel structures: does not sag in a thick coat and is applied in a single coat by airless spray.
The binder of the Zn-YARFAST®-0565 primer is a modified epoxy resin: zinc powder in its solution is supplied as a base, to which the Zn-YARFAST® hardener is added in a ratio of 100:5.9. The primer is intended for steel structures and is used on its own or in coating systems. Before application the mixture is left to stand for 30 min, and it can be worked with for 12 h. The resistance of the coating to water, 3 % NaCl and petrol at 20 °C is at least 72 h.
| Manufacturer | Khimtek — OOO PO “Khimtek”, Yaroslavl |
|---|---|
| Type | zinc-rich primers |
| Use | steel structures |
| Base | Zinc powder in a solution of modified epoxy resin in organic solvents; base + Zn-YARFAST® hardener |
| Colour | grey |
| Packaging | 25 kg, 60 kg |
| Application method | air or airless spray, brush, roller |
| Drying | standing time 30 min after mixing; pot life of the mixture 12 h |
| Key properties | Base:hardener ratio: 100:5.9 parts, Resistance at 20 °C: water, 3 % NaCl, petrol — at least 72 h, Surface preparation: GOST 9.402 (cleaning degree 2, degreasing degree 1) or Sa 2½ / St 3 |
| Compatible materials | on its own or in coating systems; Zn-YARFAST® thinner up to 5 % |
| Shelf life | storage from −40 to +40 °C |
| Standards | TU 2312-050-81922626-2020 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Thixotropic quick-drying primer-enamel for steel structures: does not sag in a thick coat and is applied in a single coat by airless spray.
Phenol-formaldehyde primer for steel structures, bridges and equipment under most solvent-borne enamels, from −60 to +100 °C.
Enamel for railway wagons, tank cars, equipment and structures in acid, alkali, salt and aggressive gas media, applied over KhS-059 or KhS-010 primer.
Chemical-resistant epoxy enamel for metal surfaces exposed to hot alkalis, over primed and unprimed metal.
Petrol- and oil-resistant primer-enamel for equipment and products made of ferrous metal and cast iron, including engines, at temperatures up to 130 °C.
Primer for equipment, metal and concrete structures in acid and alkali media up to 60 °C, coating service life up to 15 years.