Zn-YARFAST®-0567 primer — zinc-rich primer for elevated temperatures
Zinc-rich epoxy primer for steel structures and products operating in a corrosive environment at elevated temperatures.

FL-03K Khimtek is a primer to GOST 9109-81 based on a phenol-formaldehyde varnish modified with vegetable oils; it is produced in brown, yellow and grey. It is used on steel structures, bridges and equipment as a primer under most solvent-borne enamels. The coating is resistant to temperature changes from −60 to +100 °C, to industrial oil for at least 72 h and to 3 % NaCl for at least 24 h.
| Manufacturer | Khimtek — OOO PO “Khimtek”, Yaroslavl |
|---|---|
| Type | alkyd primers |
| Use | steel structures, bridges, equipment |
| Base | Pigments and fillers in a phenol-formaldehyde varnish modified with vegetable oils |
| Colour | brown, yellow, grey |
| Packaging | 60 kg containers |
| Application method | air or airless spray, dipping, brush; thinning with a 1:1 mixture of xylene and white spirit |
| Drying | to degree 3 — no more than 8 h at (20±2) °C; to degree 4 — no more than 35 min at (105±5) °C |
| Key properties | Non-volatile matter by weight: 61±3 %, Adhesion: max. 1 point, Impact strength (U-1): at least 50 cm, Resistance at 20 °C: 3 % NaCl — at least 24 h; industrial oil — at least 72 h, Resistance to temperature changes: from −60 to +100 °C |
| Compatible materials | most solvent-borne enamels |
| Shelf life | 6 months from the date of manufacture |
| Standards | GOST 9109-81 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Zinc-rich epoxy primer for steel structures and products operating in a corrosive environment at elevated temperatures.
High-gloss alkyd-urethane primer-enamel for steel structures, machinery and railway wagons in an open industrial atmosphere, tinted to RAL.
Two-pack epoxy primer for industrial atmospheres with aggressive gases and vapours, applied over corroded metal.
One-component chemical-resistant primer-enamel for metal and reinforced concrete structures in chemical and petrochemical plants.
Quick-drying primer-enamel for repair painting of large steel structures, pipes and rusty surfaces, applied over spot rust.
Primer for equipment, metal and concrete structures in acid and alkali media up to 60 °C, coating service life up to 15 years.