Khimtek
KO-198 Khimtek — air-drying organosilicon enamel
Air-drying enamel for steel structures and overhead contact line supports in acid, mineralised and sea water environments, from −60 to +300 °C.
Price on request
Khimtek
EP-0199 Khimtek — epoxy primer for corroded metal
The epoxy primer EP-0199 Khimtek (TU 6-10-2084-86) with anticorrosive additives is cured with hardener No. 1 and applied over corroded metal with a layer of corrosion products. It is used in industrial atmospheres with aggressive gases and vapours, under short-term splashing with acids and alkalis, in shipbuilding and on railway machinery. It serves as a primer in coating systems with most solvent-borne enamels or as a stand-alone coating; the content of volatile organic compounds is less than 25 %.
Specifications
| Manufacturer | Khimtek — OOO PO “Khimtek”, Yaroslavl |
|---|---|
| Type | epoxy primers |
| Use | steel structures, chemical plants |
| Base | Two-pack epoxy: epoxy resin solution with pigments, fillers and anticorrosive additives + hardener No. 1 |
| Colour | tinting to RAL |
| Packaging | metal drum 55 l (60 kg) |
| Application method | air or airless spray, flow coating, dipping, brush; thinner 646, xylene, toluene |
| Drying | standing time 30 min after adding the hardener; to degree 3 — no more than 24 h at (20±2) °C, no more than 1 h at 120 °C; pot life at least 8 h |
| Compatible materials | primer in coating systems or stand-alone coating; compatible with most solvent-borne enamels |
| Shelf life | 12 months from the date of manufacture |
| Standards | TU 6-10-2084-86 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Khimtek
Khimtek
YARFAST®-0793 chemical-resistant primer-enamel — two-component, for chemical plants
Two-component chemical-resistant primer-enamel for equipment, structures and pipelines in the atmosphere of chemical plants.
Price on request
Khimtek
KhS-759 Khimtek — enamel for acid, alkali and salt media
Enamel for railway wagons, tank cars, equipment and structures in acid, alkali, salt and aggressive gas media, applied over KhS-059 or KhS-010 primer.
Price on request
Khimtek
Zn-YARFAST®-0567 primer — zinc-rich primer for elevated temperatures
Zinc-rich epoxy primer for steel structures and products operating in a corrosive environment at elevated temperatures.
Price on request
Khimtek
GF-021 Khimtek — alkyd primer to GOST 25129-82
Alkyd primer for steel structures and equipment under GF, PF, EP, MS, ML and AU enamels, also used as a transit primer.
Price on request
Khimtek
YARFAST® alkyd-urethane primer-enamel — one-component “3-in-1” coating
Alkyd-urethane “3-in-1” primer-enamel for steel structures and equipment, applied over metal with traces of rust and at sub-zero temperatures.
Price on request