Khimtek
YARFAST® anticorrosion alkyd-urethane primer — primer under YARFAST® enamel
One-component alkyd-urethane primer for steel structures and equipment: one coat under YARFAST® enamel or two coats on its own.
Price on request
Khimtek
KO-198 Khimtek — air-drying organosilicon enamel
The one-pack air-drying enamel KO-198 Khimtek on an organosilicon varnish is applied without prior priming in 2–3 coats and forms a stand-alone coating. It is used on steel structures exposed to sulphuric acid, nitric and hydrochloric acid vapours, mineralised groundwater and sea water, on foundations of reinforced concrete overhead contact line supports and in tropical climates. Heat resistance is from −60 to +300 °C; the enamel dries to degree 3 in no more than 20 min at 20 °C.
Specifications
| Manufacturer | Khimtek — OOO PO “Khimtek”, Yaroslavl |
|---|---|
| Type | heat-resistant coatings |
| Use | steel structures, concrete, chemical plants |
| Base | One-pack air-drying enamel: pigments and fillers in an organosilicon varnish |
| Colour | green, red-brown |
| Application method | without prior priming; 2–3 coats |
| Drying | tack-free 30 min at +20 °C; to degree 3 — no more than 20 min at (20±2) °C |
| Key properties | Heat resistance: from −60 °C to +300 °C, Non-volatile matter by weight: at least 30 %, Impact strength (U-1): at least 50 cm, Adhesion: max. 2 points |
| Compatible materials | stand-alone coating |
| Standards | TU 6-02-841-74 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Khimtek
Khimtek
YARFAST® PRO polyurethane primer-enamel — coating for unprimed metal
Two-component polyurethane primer-enamel for steel structures and the external surfaces of petroleum product tanks, 1,000 h in salt spray.
Price on request
Khimtek
YARFAST® alkyd-urethane enamel — topcoat over YARFAST® primer
One-component alkyd-urethane enamel for metal, concrete and reinforced concrete surfaces in an open industrial atmosphere.
Price on request
Khimtek
KhV-0278 Khimtek — perchlorovinyl primer-enamel over rust and mill scale
One-component primer-enamel with a rust modifier for equipment and steel structures, applied over mill scale, rust and old coatings.
Price on request
Khimtek
METAPROTEK®-0237 primer-enamel — for repair painting of structures and pipes
Quick-drying primer-enamel for repair painting of large steel structures, pipes and rusty surfaces, applied over spot rust.
Price on request
Khimtek
Zn-YARFAST®-0563 primer — one-component zinc-rich epoxy primer
One-component zinc-rich epoxy primer for steel structures, thinned with xylene or solvent naphtha up to 5 %.
Price on request