Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
YARFAST® PRO polyurethane primer-enamel — coating for unprimed metal
Khimtek

YARFAST® PRO polyurethane primer-enamel — coating for unprimed metal

Primer-enamels

YARFAST® PRO is a two-component polyurethane primer-enamel with a corrosion inhibitor that is applied to unprimed metal, including metal with traces of corrosion. It is intended for steel structures, external surfaces of petroleum product tanks, lifting and handling equipment, and agricultural, municipal and road machinery. According to the test report, the coating withstood 1,000 h in salt spray, and durability of more than 15 years under UKhL1 conditions is confirmed by a certificate of conformity. The mass fraction of non-volatile matter is 50 %.

Specifications

ManufacturerKhimtek — OOO PO “Khimtek”, Yaroslavl
Typeprimer-enamels
Usesteel structures, tanks, equipment, oil and gas
BaseTwo-component polyurethane: pigments and fillers in a polyurethane film former with a corrosion inhibitor; hardener “YARFAST® PRO”
Colourper the RAL catalogue
Application methodover unprimed metal, incl. metal with traces of corrosion; YARFAST® PRO thinner
Dryingto degree 3 — no more than 3 h at (20±2) °C; pot life after mixing at least 6 h
Key propertiesBase:hardener ratio by weight: 100:9.3, Non-volatile matter by weight: 50 %, Adhesion: 0 points, Impact strength (U-1): direct 50 cm, reverse 40 cm, Resistance at 20 °C: water — 120 h
Compatible materialsstand-alone coating without primer
StandardsTU 20.30.12-068-81922626-2023

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by Khimtek