Khimtek
EP-0199 Khimtek — epoxy primer for corroded metal
Two-pack epoxy primer for industrial atmospheres with aggressive gases and vapours, applied over corroded metal.
Price on request
Khimtek
METAPROTEK®-0962 chemical-resistant primer-enamel — two-component epoxy
The chemical-resistant METAPROTEK®-0962 is based on a modified epoxy resin with a corrosion inhibitor and is cured with the METAPROTEK hardener in a ratio of 100:15. The primer-enamel is intended for metal and reinforced concrete structures of chemical and petrochemical plants and industrial atmospheres, and is also used indoors. The stand-alone coating is applied in 2–3 coats at temperatures from +5 to +35 °C; the pot life of the mixture is at least 24 h, and resistance to water, petrol, oil and 3 % NaCl is at least 72 h.
Specifications
| Manufacturer | Khimtek — OOO PO “Khimtek”, Yaroslavl |
|---|---|
| Type | primer-enamels |
| Use | steel structures, concrete, chemical plants, oil and gas |
| Base | Two-component: pigments and fillers in a modified epoxy resin with a corrosion inhibitor + METAPROTEK hardener |
| Colour | to samples or the RAL colour card |
| Application method | air (25–35 s) and airless (40–50 s) spray, brush, roller; 2–3 coats; thinning with R-4, R-4A, R-5, R-5A |
| Application temperature | from +5 to +35 °C; relative humidity no higher than 85 % |
| Drying | to degree 3 — no more than 1.5 h at (20±2) °C; ready for use 30 min after mixing; pot life at least 24 h |
| Key properties | Base:hardener ratio: 100:15 parts, Non-volatile matter of the base by weight: at least 50 %, Adhesion: max. 1 point, Impact strength (U-1): at least 50 cm, Resistance at 20 °C: water, petrol, industrial oil, 3 % NaCl — at least 72 h, Surface preparation: GOST 9.402 (cleaning degree 2, degreasing degree 1) or Sa 2½ / St 3 |
| Compatible materials | stand-alone coating |
| Shelf life | 12 months from the date of manufacture |
| Standards | TU 20.30.12-071-81922626-2024 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Khimtek
Khimtek
YARFAST®-0111 primer-enamel — quick-drying transit coating
Quick-drying primer-enamel for steel structures: transit (preservation) coating, primer under enamels or a stand-alone coat.
Price on request
Khimtek
FL-03K Khimtek — phenol-formaldehyde primer to GOST 9109-81
Phenol-formaldehyde primer for steel structures, bridges and equipment under most solvent-borne enamels, from −60 to +100 °C.
Price on request
Khimtek
YARFAST®-0516 primer-enamel — petrol- and oil-resistant, for temperatures up to 130 °C
Petrol- and oil-resistant primer-enamel for equipment and products made of ferrous metal and cast iron, including engines, at temperatures up to 130 °C.
Price on request
Khimtek
GF-021 Khimtek — alkyd primer to GOST 25129-82
Alkyd primer for steel structures and equipment under GF, PF, EP, MS, ML and AU enamels, also used as a transit primer.
Price on request
Khimtek
YARFAST® PRO polyurethane primer-enamel — coating for unprimed metal
Two-component polyurethane primer-enamel for steel structures and the external surfaces of petroleum product tanks, 1,000 h in salt spray.
Price on request