Khimtek
YARFAST®-0715 primer-enamel — coating for steel, aluminium and galvanised surfaces
Primer-enamel for steel, aluminium and galvanised surfaces, including the inside of metal tanks for water and petroleum products.
Price on request
Khimtek
YARFAST® PRO polyurethane primer-enamel — coating for unprimed metal
YARFAST® PRO is a two-component polyurethane primer-enamel with a corrosion inhibitor that is applied to unprimed metal, including metal with traces of corrosion. It is intended for steel structures, external surfaces of petroleum product tanks, lifting and handling equipment, and agricultural, municipal and road machinery. According to the test report, the coating withstood 1,000 h in salt spray, and durability of more than 15 years under UKhL1 conditions is confirmed by a certificate of conformity. The mass fraction of non-volatile matter is 50 %.
Specifications
| Manufacturer | Khimtek — OOO PO “Khimtek”, Yaroslavl |
|---|---|
| Type | primer-enamels |
| Use | steel structures, tanks, equipment, oil and gas |
| Base | Two-component polyurethane: pigments and fillers in a polyurethane film former with a corrosion inhibitor; hardener “YARFAST® PRO” |
| Colour | per the RAL catalogue |
| Application method | over unprimed metal, incl. metal with traces of corrosion; YARFAST® PRO thinner |
| Drying | to degree 3 — no more than 3 h at (20±2) °C; pot life after mixing at least 6 h |
| Key properties | Base:hardener ratio by weight: 100:9.3, Non-volatile matter by weight: 50 %, Adhesion: 0 points, Impact strength (U-1): direct 50 cm, reverse 40 cm, Resistance at 20 °C: water — 120 h |
| Compatible materials | stand-alone coating without primer |
| Standards | TU 20.30.12-068-81922626-2023 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Khimtek
Khimtek
KhV-0278 Khimtek — perchlorovinyl primer-enamel over rust and mill scale
One-component primer-enamel with a rust modifier for equipment and steel structures, applied over mill scale, rust and old coatings.
Price on request
Khimtek
METAPROTEK®-0855 primer-enamel — “3-in-1”, application from −10 °C
Quick-drying “3-in-1” primer-enamel over corroded and clean metal, concrete and reinforced concrete, applied at temperatures from −10 to +40 °C.
Price on request
Khimtek
KO-8104 Khimtek — heat-resistant organosilicon enamel
Heat-resistant organosilicon enamel for tank cars, distillation columns, pipelines, chimneys and furnaces, from 400 to 600 °C depending on colour.
Price on request
Khimtek
YARFAST® alkyd-urethane primer-enamel — one-component “3-in-1” coating
Alkyd-urethane “3-in-1” primer-enamel for steel structures and equipment, applied over metal with traces of rust and at sub-zero temperatures.
Price on request
Khimtek
FL-03K Khimtek — phenol-formaldehyde primer to GOST 9109-81
Phenol-formaldehyde primer for steel structures, bridges and equipment under most solvent-borne enamels, from −60 to +100 °C.
Price on request