Khimtek
METAPROTEK®-0855 primer-enamel — “3-in-1”, application from −10 °C
Quick-drying “3-in-1” primer-enamel over corroded and clean metal, concrete and reinforced concrete, applied at temperatures from −10 to +40 °C.
Price on request
Khimtek
KO-198 Khimtek — air-drying organosilicon enamel
The one-pack air-drying enamel KO-198 Khimtek on an organosilicon varnish is applied without prior priming in 2–3 coats and forms a stand-alone coating. It is used on steel structures exposed to sulphuric acid, nitric and hydrochloric acid vapours, mineralised groundwater and sea water, on foundations of reinforced concrete overhead contact line supports and in tropical climates. Heat resistance is from −60 to +300 °C; the enamel dries to degree 3 in no more than 20 min at 20 °C.
Specifications
| Manufacturer | Khimtek — OOO PO “Khimtek”, Yaroslavl |
|---|---|
| Type | heat-resistant coatings |
| Use | steel structures, concrete, chemical plants |
| Base | One-pack air-drying enamel: pigments and fillers in an organosilicon varnish |
| Colour | green, red-brown |
| Application method | without prior priming; 2–3 coats |
| Drying | tack-free 30 min at +20 °C; to degree 3 — no more than 20 min at (20±2) °C |
| Key properties | Heat resistance: from −60 °C to +300 °C, Non-volatile matter by weight: at least 30 %, Impact strength (U-1): at least 50 cm, Adhesion: max. 2 points |
| Compatible materials | stand-alone coating |
| Standards | TU 6-02-841-74 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Khimtek
Khimtek
KhV-0278 Khimtek — perchlorovinyl primer-enamel over rust and mill scale
One-component primer-enamel with a rust modifier for equipment and steel structures, applied over mill scale, rust and old coatings.
Price on request
Khimtek
METAPROTEK®-0237 primer-enamel — for repair painting of structures and pipes
Quick-drying primer-enamel for repair painting of large steel structures, pipes and rusty surfaces, applied over spot rust.
Price on request
Khimtek
YARFAST®-0111B primer-enamel — thixotropic, applied in a single coat
Thixotropic quick-drying primer-enamel for steel structures: does not sag in a thick coat and is applied in a single coat by airless spray.
Price on request
Khimtek
“PROTEKT-AKRIL” primer-enamel — two-component, for ambient and forced drying
Two-component primer-enamel for steel structures, external surfaces of petroleum product tanks and containers, forced and ambient drying.
Price on request
Khimtek
KhS-010 Khimtek — primer based on a vinylidene chloride–vinyl chloride copolymer
Primer for equipment, metal and concrete structures in acid and alkali media up to 60 °C, coating service life up to 15 years.
Price on request