Kronos SPb
Forpol-ZhD — spray-applied polyurea-urethane mastic for bridges and tunnels
Anticorrosive and waterproofing mastic for railway bridges, tunnels and platforms, elongation more than 100 %.
Price on request
Kronos SPb
Remnabor Forpol-Nafta — polyurethane mastic for repairing gas pipeline insulation
A repair kit for the Forpol-Nafta coating: a two-component polyurethane mastic with 100 % solids that is applied by brush, roller or spatula. It is used to restore the external coating of pipes, fittings and shut-off valves of gas pipelines both in the factory and in the field, without expensive equipment. The pot life of the mix is more than 45 min, the compound dries to degree 3 in less than 6 h at 20 °C, and adhesion to steel is more than 7 MPa.
Specifications
| Manufacturer | Kronos SPb — AO “KRONOS SPb”, Saint Petersburg |
|---|---|
| Type | anticorrosive material |
| Base | Two-component hand-applied polyurethane repair mastic, 100 % solids |
| Colour | black |
| Application method | brush, roller, spatula |
| Drying | mix life more than 45 min; to degree 3 — less than 6 h at 20 °C |
| Key properties | Base:hardener ratio by weight: 1.15:1.00, Adhesion to steel: more than 7 MPa, Tensile strength at break: more than 8 MPa, Elongation: more than 20 %, Heat resistance: from −40 °C to +60 °C |
| Compatible materials | repair of “Forpol-Nafta” coatings |
| Standards | TU 2458-166-20504464-2014; TU 2458-167-20504464-2014; OTT-25.220.01-KTN-113-14; STO Gazprom 9.1-018-2012 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Kronos SPb
Kronos SPb
Pigmokron — fast-drying alkyd 3-in-1 primer-enamel for metal and rust
One-component 3-in-1 primer-enamel for bridges, supports, wagons and machinery, applied over rust at temperatures from 0 °C.
Price on request
Kronos SPb
Forpol-Nafta 80 — polyurethane mastic for gas pipelines with temperatures up to +80 °C
Polyurea-urethane coating for gas pipelines, CS and UGS: service from −60 to +80 °C, briefly up to +230 °C.
Price on request
Kronos SPb
GF-021 Kronos — alkyd anticorrosive primer for metal and wood
GF-021 primer from AO “KRONOS SPb” for steel structures and equipment under alkyd and oil enamels, dries in max. 35 min at 105 °C.
Price on request
Kronos SPb
Protekron — two-component zinc-rich epoxy primer
Sacrificial epoxy primer with zinc for steel structures in the atmosphere and at elevated humidity, more than 90 % non-volatile matter.
Price on request
Kronos SPb
Epokron primer — two-component epoxy anticorrosive primer
Epoxy primer for bridges, steel structures and pipelines, applied from −10 °C and serving as an adhesion layer on aluminium and galvanised steel.
Price on request