Kronos-Deko primer-enamel — acrylic-urethane coating without a separate primer
Acrylic-urethane primer-enamel for metal, concrete and plastic, applied in two coats without priming, recoat interval 15–30 min.

The mastic was developed to the standard requirements of NII ZhT for JSC RZD facilities — bridge structures, tunnels, platforms and deck slabs; it has a VNIIZhT conclusion. It is a spray-applied two-component polyurea-urethane with 100 % solids that protects against corrosion and waterproofs at the same time: on concrete it is applied over the impregnating varnish “Eteral”, on metal over the primer “Forpol-Primer”. The coating dries to degree 3 in less than 5 min, the elongation is more than 100 %, and it is resistant to petroleum products, alkalis, acids and salt solutions.
| Manufacturer | Kronos SPb — AO “KRONOS SPb”, Saint Petersburg |
|---|---|
| Type | anticorrosive material |
| Use | bridges, concrete, steel structures |
| Base | Two-component spray-applied polyurea-urethane mastic, 100 % solids |
| Colour | black |
| Application method | units for two-component systems with heating of the components (40–75 °C), one coat |
| Application temperature | air at least +5 °C; surface at least +20 °C; relative humidity max. 85 % |
| Drying | mix life less than 90 s; to degree 3 — less than 5 min at 23 °C |
| Key properties | Base:hardener ratio by weight: 1:1.3, Tensile strength at break: more than 10 MPa, Elongation: more than 100 %, Water absorption over 24 h at 23 °C: less than 1.0 %, Heat resistance: from −60 °C to +60 °C, Resistance to organic solvents, oils, petroleum products, alkalis, acids and salt solutions |
| Shelf life | 12 months from the date of manufacture; storage from +10 to +25 °C |
| Standards | TU 2312-147-20504464-2012 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Acrylic-urethane primer-enamel for metal, concrete and plastic, applied in two coats without priming, recoat interval 15–30 min.
Alkyd primer for railway rolling stock and agricultural machinery under PF-115 and Kronos-Sprint enamels, withstands up to +120 °C.
One-component compound for mineral wagons and mineral fertiliser containers, elongation at least 200 %, applied from −20 °C.
Hand-applied repair mastic for Forpol-Nafta coatings on gas pipeline pipes and fittings, pot life of the mix more than 45 min.
Light grey pentaphthalic primer for metal and wood, including previously painted surfaces, dries in max. 6 h at 20 °C.
GF-021 primer from AO “KRONOS SPb” for steel structures and equipment under alkyd and oil enamels, dries in max. 35 min at 105 °C.