AKRUS® Epoks (primer) — two-component epoxy primer
High-adhesion epoxy primer for mechanical engineering products, bridges, hydraulic structures and the outer surface of oil tanks.
AKRUS® Gidro RR combines anticorrosive and waterproofing protection of concrete, brick, asbestos cement and metal. The two-component composition based on epoxy resins is suitable for floors and walls of industrial premises and withstands elevated humidity, salt and alkali solutions, oils, petroleum products and detergents. A system of 2–3 coats retains its protective properties on concrete for at least 8 years and on metal for at least 4 years.
| Manufacturer | AKRUS — OOO Anticorrosive Protective Coatings, Podolsk |
|---|---|
| Type | epoxy enamels and coatings |
| Use | concrete, steel structures, bridges |
| Base | two-component composition based on epoxy resins |
| Colour | white, light grey, light green, red-brown |
| Packaging | 20 kg base (component A) + 3 kg hardener (component B) |
| Key properties | Period of retention of protective properties of a 2–3 coat system: on concrete at least 8 years, on metal at least 4 years, Resistance: elevated humidity, salt and alkali solutions, oils, petroleum products, detergents |
| Shelf life | 12 months |
| Standards | TU 2312-017-93475776-2007 with amendment 1 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
High-adhesion epoxy primer for mechanical engineering products, bridges, hydraulic structures and the outer surface of oil tanks.
Polyamine-cured epoxy coating for steel structures, marine and port structures in aggressive industrial and marine atmospheres.
Epoxy primer for the inner surfaces of tanks, railway tank cars and equipment, resistant to crude oil and petroleum products.
High-gloss polyurethane enamel for oil tanks, above-ground pipelines, bridges and nuclear power facilities.
Polyurethane primer-enamel for protective and decorative painting of steel structures, rolling stock and the outer surface of oil tanks.
Novolac enamel for the inner surfaces of tanks and pipelines for crude and commercial oil; service from minus 60 °C to 90 °C.