Pakol
Pakol Remontny Zima 400 K — antifreeze R3 mortar for non-structural repair
Coarse-grained R3 mix with an antifreeze admixture for non-structural repair of walls, columns and ceilings down to −10 °C without heating.
Price on request
Pakol
Pakol Torkret — fibre-reinforced R3 mix for shotcreting
The non-shrink thixotropic mix with polymer fibre is designed for structural repair of overhead, inclined and vertical surfaces of concrete, brick and stone: the damage is filled in a single application. The material is used on bridges and overpasses, in tunnels and metro, tanks and treatment plants, on columns and beams; work is carried out at temperatures from +5 °C. Versions with 1.0 and 3.0 mm aggregate are available; after 28 days 40.0 MPa in compression (B30), W12, F1 300, class R3.
Specifications
| Manufacturer | Pakol — OOO “NPO Pakol”, Vysokaya Gora |
|---|---|
| Type | shotcrete mortars |
| Use | bridges and overpasses, tunnels and metro, tanks and treatment plants, columns and beams |
| Base | Dry construction mix with polymer fibre, non-shrink, thixotropic type, on a cement binder |
| Packaging | 25 kg bags (three-ply with a polyethylene liner) |
| Application method | For structural repair of overhead, inclined and vertical surfaces of concrete, brick and stone structures with local damage (spalls, gouges, etc.) up to 20 mm deep (for the fine-grained fraction) and up to 50 mm (for the mix with coarse aggregate) in a single application |
| Application temperature | optimum +18…+30 °C; permitted from +5 °C |
| Curing | moist curing for 2 days (covering with film, spraying with water) |
| Key properties | aggregate size, mm: 3.0 (1.0); mixing water, l per 1 kg: 0.15…0.17; workability retention, min: 40; workability: cone penetration 4–8 cm (Pk2), spread 170-190 mm; bond strength to substrate, MPa: 2.0; strength after 24 h: flexural 4.0 / compressive 15.0 MPa; strength after 28 days: flexural 8.0 (Btb6.0) / compressive 40.0 (B30) MPa; modulus of elasticity, GPa: 18.0; contact zone frost resistance: Fkz 75; frost resistance: F1 300, F2 150; watertightness: W12 |
| Shelf life | 12 months from the date of manufacture; storage at -30…+40 °C, humidity no more than 70 % |
| Standards | Pk2, B30, Btb6.0, W12, F1 300 to GOST 31357-2007 (taking into account the requirements of GOST R 56378-2015, class R3); TU 23.64.10-002-76310469-2021 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Pakol
Pakol
Pakol Torkret Zima — shotcrete mix for work in frost down to −10 °C
Fibre-reinforced shotcrete mix for structural repair of walls and ceilings of bridges, tunnels and tanks in frost down to −10 °C without heating.
Price on request
Pakol
Pakol Remontny BM — fine-grained thixotropic mortar with rapid strength gain
Fine-grained rapid-hardening thixotropic mix for urgent filling of shallow spalls at −10…+7 °C; 10.0 MPa compressive after 2 h.
Price on request
Pakol
Pakol Finish — skim-coat mix for finish repair and levelling
Finely dispersed cementitious skim coat for finish repair and levelling of concrete, brick and stone walls and ceilings; bond to substrate 2.8 MPa.
Price on request
Pakol
Pakol Remontny BK — rapid-hardening thixotropic mortar for work at −10…+7 °C
Rapid-hardening thixotropic mix for urgent repair of walls, ceilings and columns at −10…+7 °C; 12.0 MPa compressive after 2 h.
Price on request
Pakol
Pakol Remontny 800 K — high-strength thixotropic B60 mortar for strengthening
Thixotropic B60 mix with a modulus of elasticity of 27.0 GPa for strengthening reinforced concrete columns, beams and walls of buildings and bridges; flexural 12.0 MPa.
Price on request