OGNEZA-PO-T fire-retardant impregnation for fabrics (solution)
Water-based impregnation for fabrics and carpets that makes the material hard-to-ignite per GOST R 50810-95 and leaves no marks.

OGNEZA-KT does not intumesce on its own: it is a thermal insulation compound on an acrylic copolymer solution with low-thermal-conductivity fillers. It serves as the first layer of the OGNEZA-KONSTRUKTIV system: KT is applied over GF-021 or KhS-059 primer, with OGNEZA-UM intumescent paint on top. The material is not used separately. The system is certified for 90 and 120 minutes per GOST R 53295 and is intended for steel structures of buildings of fire resistance degree I and II. The compound can be applied from −10 °C.
| Manufacturer | OGNEZA — OOO “OGNEZA”, St Petersburg |
|---|---|
| Fire protection performance | OGNEZA-KONSTRUKTIV system (OGNEZA-KT + OGNEZA-UM): certificates for 90 and 120 minutes; GOST R 53295 |
| Application | steel structures |
| Service conditions | service temperature from −40 to +40 °C |
| Base | thermal insulation compound: acrylic copolymer solution in organic solvents with low-thermal-conductivity fillers; non-intumescent |
| Packaging | 20 kg |
| Application method | brush, roller, spray gun, airless spray |
| Application temperature | from −10 to +40 °C |
| Drying | between coats 4–8 h at 20 °C; up to 48 h |
| Compatible primers and topcoats | overcoated with OGNEZA-UM fire-retardant paint; primers GF-021 (GOST 25129), KhS-059 (GOST 23494) |
| Standards | TU 20.30.22-024-92450604-2019; GOST R 53295; certificates under TR EAEU 043/2017 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Water-based impregnation for fabrics and carpets that makes the material hard-to-ignite per GOST R 50810-95 and leaves no marks.
Non-combustible mastic for fire protection of air ducts — an alternative to basalt materials; EI 30, EI 45, EI 60 per GOST R 53299-2019.
Water-based intumescent paint for fire protection of steel structures indoors: 15–90 minutes, groups 7–3 per GOST R 53295.
Acrylic fire-retardant varnish for timber, concrete, brick and plaster indoors and outdoors; class KM2 (G1, D2, T2), clear or tinted.
Concentrate for preparing a fire and bio-protective timber impregnation: groups I and II per GOST R 53292, for use indoors and outdoors without precipitation.
Self-priming fire-retardant varnish for timber, including parquet and facades: groups I and II, G1, V1, D2, T2, RP1, UV resistance.