OGNEZA-PO-PROF fire-retardant impregnation (solution)
Clear water-soluble impregnation for timber without decorative finish — rafters, roofs, scaffolding; groups I and II per GOST R 53292.

The OGNEZA-PM(V)-L collar is intended for plastic ventilation ducts of larger cross-section — with an internal diameter from 125 to 240 mm. The powder-coated steel body houses lamellae, an insert of OGNEZA-TRM intumescent material and an intumescent sealing ring. The duct can be routed in any direction. The fire resistance rating of the assembly is at least EI 180. The size is selected according to the duct diameter; we send documentation on request.
| Manufacturer | OGNEZA — OOO “OGNEZA”, St Petersburg |
|---|---|
| Fire protection performance | at least EI 180 |
| Application | air ducts, penetrations and joints |
| Service conditions | plastic ventilation ducts with an internal diameter of 125–240 mm; any routing |
| Base | powder-coated steel body, lamellae, OGNEZA-TRM insert, intumescent sealing ring |
| Packaging | sizes from 125 to 240 mm |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Clear water-soluble impregnation for timber without decorative finish — rafters, roofs, scaffolding; groups I and II per GOST R 53292.
Acrylic highly elastic fire-stopping sealant for expansion joints and pipe penetrations; up to EI 240, operates from −60 to +120 °C.
Water-soluble fire and bio-protective impregnation for timber indoors and outdoors without direct precipitation; groups I and II per GOST R 53292.
Self-priming fire-retardant varnish for timber, including parquet and facades: groups I and II, G1, V1, D2, T2, RP1, UV resistance.
Fire protection of air ducts with PMBOR foil-faced basalt mat on OGNEZA-K adhesive or OGNET mastic; ratings from 60 to 240 minutes.
Non-intumescent thermal insulation layer of the OGNEZA-KONSTRUKTIV system for steel structures; paired with OGNEZA-UM — 90 and 120 minutes.