OGNEZA-LTU intumescent sealing tape (incl. LTU PREMIUM)
Self-adhesive intumescent tape for fire doors, hatches, dampers and air duct flanges; up to EI 240 as part of an assembly.

If cable routes are going to change, the modular OGNEZA-PM-K penetration is convenient: thanks to the removable cover, cables are added and removed without dismantling the assembly. Inside the steel body there is an intumescent material that expands by at least 900 % and a basalt smoke- and heat-insulating gasket. The penetration suits walls and floors in buildings of any purpose, including gypsum fibre board (GVL) walls, and operates from −50 to +80 °C. The model range covers different cables; the service life is at least 30 years.
| Manufacturer | OGNEZA — OOO “OGNEZA”, St Petersburg |
|---|---|
| Application | cable lines, penetrations and joints |
| Service conditions | cable line crossings with walls and floors in buildings of any purpose, incl. gypsum fibre board (GVL) walls; service temperature from −50 to +80 °C |
| Base | steel body with removable cover + intumescent material (expansion at least 900 %) + basalt smoke/heat-insulating gasket |
| Colour | red |
| Packaging | model range for different cables |
| Application method | cables can be added and removed without dismantling |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Self-adhesive intumescent tape for fire doors, hatches, dampers and air duct flanges; up to EI 240 as part of an assembly.
Non-combustible water-based paint of class KM0 for concrete, brick and plaster inside buildings — finishing of escape routes in schools and kindergartens.
Fire collar with lamellae for plastic ventilation ducts with an internal diameter of 125–240 mm; fire resistance rating at least EI 180.
Acrylic intumescent sealant for cable penetrations and joints in walls and floors; TR EAEU 043/2017 certificates for 60 and 150 minutes.
Fire collar for ventilation ducts, including plastic ones, up to 130 mm in diameter; fire resistance rating at least EI 180.
Non-combustible KM0 paint with factory tinting for mineral surfaces indoors and outdoors under a canopy; not intended for metal.