Monolit (fire-protective plaster system) for RC and tunnels (KrilaK)
Fire-protective plaster system on a mineral binder for load-bearing RC structures and tunnels, REI up to 240, hydrocarbon fire.

Termal is a stitched roll mat of superfine mineral fibres, with or without foil. It is suitable for structures of complex shape: air ducts, chimneys, flue ducts, air conditioning systems, load-bearing steel, concrete, reinforced concrete and timber elements. The material is non-combustible (NG), the fire resistance rating is EI and R up to 180, and the service life is at least 25 years. It is installed foil side out on Fayreks-700 mastic with an overlap; the same mat is used for fire protection of carbon fibre plastic in the AK-Strong system.
| Manufacturer | KrilaK — NPO “Association KrilaK” |
|---|---|
| Fire protection performance | EI, R up to 180; NG |
| Application | air ducts, steel structures, concrete and reinforced concrete, timber |
| Service conditions | chimneys, air conditioning, flue ducts, air ducts; load-bearing concrete, steel, RC and timber structures of complex shape; from −50 to +60 °C |
| Base | stitched mat of superfine mineral fibres, with or without foil |
| Packaging | rolls 1000 mm wide, 21; 10.5; 12 linear m long |
| Application method | installed foil side out on Fayreks-700 mastic, overlap 10 cm |
| Application temperature | not below +5 °C, relative humidity < 85 % |
| Drying | between coats at least 6 h; total 24 h at 20 °C |
| Shelf life | 2 years |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Fire-protective plaster system on a mineral binder for load-bearing RC structures and tunnels, REI up to 240, hydrocarbon fire.
Fire-protective cable coating for 100 % humidity and precipitation at NPPs, chemical plants and in the fuel and energy sector; RP1, D1, V1, T1.
Solvent-borne fire-retardant paint for steel in the open atmosphere, R up to 90, moisture-resistant without a topcoat, application down to −15 °C.
Fire protection system on an inorganic binder with reinforcing glass fabric for air ducts and flue ducts, EI up to 60.
Fire-resistant filling system for expansion joints in floors, roofs, walls and partitions, REI up to 240, for seismic areas.
Colourless fire and bio-protective impregnation for timber indoors, fire protection performance group I with two coats per NPB 251-98.