Stabiterm-217 fire protection paint (water-based, ready to use)
Ready-to-use water-based intumescent paint for steel structures, R120 (group 2), white, in a 20 kg pail or can.

Stabiterm-209 is intended for industrial sites where petroleum products or chemical spills may reach the fire protection coating. It is an intumescent paint on an organo-dispersion binder, thinned with xylene; it serves indoors and outdoors from −50 to +50 °C and withstands moderately aggressive environments and high humidity without a finishing coat. Fire protection performance is group 2 (R120), 45–120 minutes. It is applied mechanically, including in frost down to −15 °C; colour grey, 25 kg can.
| Manufacturer | Stabiterm — OOO NPF Fire Protection Laboratory, Dzerzhinsk |
|---|---|
| Fire protection performance | fire protection performance group 2 (R120); 45–120 min |
| Application | steel structures |
| Service conditions | indoors and in open atmosphere (from −50 °C to +50 °C), moderately aggressive environments, premises with high humidity; no finish required |
| Base | intumescent paint on an organo-dispersion film-forming binder (thinner: xylene) |
| Colour | grey |
| Packaging | metal can, 25 kg |
| Application method | mechanised application; coat by coat |
| Application temperature | minimum for mechanised application: −15 °C |
| Compatible primers and topcoats | no finish required; compatible with primers of other manufacturers |
| Shelf life | 12 months in unopened factory packaging |
| Standards | GOST R 53295-2009; TR EAEU 043/2017 certificate |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Ready-to-use water-based intumescent paint for steel structures, R120 (group 2), white, in a 20 kg pail or can.
One-component solvent-borne paint for fire protection of steel structures, R120 (group 2), application down to −15 °C.
Cement-based fire protection mix for steel and concrete, R150 under standard and hydrocarbon fire curves, 15 kg bag.
Flexible intumescent mesh for fire protection of cable routes, installed without wet processes, 1 × 20 m roll.
Thick-film water-based compound for fire protection of steel structures with an R150 rating (group 1), packed in 16 or 20 kg.
Intumescent polyurethane foam block for fire protection of cable penetrations, metal pipe penetrations, openings and joints.