Stabiterm-219 fire protection paint (water-based, weather-resistant)
Water-based intumescent paint for steel structures, R120 (group 2), serves under the open sky without a top enamel.

Unlike paints and mastics, Stabiterm-300 is a dry installation material: a flexible composite mesh that intumesces when heated. It is fixed to the cable route with mounting clips or galvanised binding wire, without special equipment or wet processes, at +5 °C and warmer. The mesh does not obstruct access to the cables: they can be replaced and new ones pulled through without damaging the protection, and the derating factor for the continuous permissible current exceeds 0.98. Service life is 40 years; the roll is 1 m wide and 20 m long.
| Manufacturer | Stabiterm — OOO NPF Fire Protection Laboratory, Dzerzhinsk |
|---|---|
| Application | cable lines |
| Base | flexible composite fire protection mesh (intumesces when heated) |
| Packaging | roll 1 m wide, 20 m long |
| Application method | fixed with mounting clips or galvanised binding wire, without special equipment |
| Application temperature | minimum installation temperature +5 °C |
| Shelf life | 12 months |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Water-based intumescent paint for steel structures, R120 (group 2), serves under the open sky without a top enamel.
Solvent-borne intumescent paint for steel, R120 (group 2), resistant to petroleum products, no finishing coat needed.
Dry mineral mix for sealing cable penetrations in walls and floors, fire resistance up to 180 minutes, 12 and 15 kg bags.
Cement-based dry mix for structural fire protection of steel and reinforced concrete with an R150 rating (group 1), 12 kg bag.
Thick-film water-based compound for fire protection of steel structures with an R150 rating (group 1), packed in 16 or 20 kg.
Cement-based fire protection mix for steel and concrete, R150 under standard and hydrocarbon fire curves, 15 kg bag.