Stabiterm-217 fire protection paint (water-based, ready to use)
Ready-to-use water-based intumescent paint for steel structures, R120 (group 2), white, in a 20 kg pail or can.

Stabiterm-209 is intended for industrial sites where petroleum products or chemical spills may reach the fire protection coating. It is an intumescent paint on an organo-dispersion binder, thinned with xylene; it serves indoors and outdoors from −50 to +50 °C and withstands moderately aggressive environments and high humidity without a finishing coat. Fire protection performance is group 2 (R120), 45–120 minutes. It is applied mechanically, including in frost down to −15 °C; colour grey, 25 kg can.
| Manufacturer | Stabiterm — OOO NPF Fire Protection Laboratory, Dzerzhinsk |
|---|---|
| Fire protection performance | fire protection performance group 2 (R120); 45–120 min |
| Application | steel structures |
| Service conditions | indoors and in open atmosphere (from −50 °C to +50 °C), moderately aggressive environments, premises with high humidity; no finish required |
| Base | intumescent paint on an organo-dispersion film-forming binder (thinner: xylene) |
| Colour | grey |
| Packaging | metal can, 25 kg |
| Application method | mechanised application; coat by coat |
| Application temperature | minimum for mechanised application: −15 °C |
| Compatible primers and topcoats | no finish required; compatible with primers of other manufacturers |
| Shelf life | 12 months in unopened factory packaging |
| Standards | GOST R 53295-2009; TR EAEU 043/2017 certificate |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Ready-to-use water-based intumescent paint for steel structures, R120 (group 2), white, in a 20 kg pail or can.
Dry mineral mix for sealing cable penetrations in walls and floors, fire resistance up to 180 minutes, 12 and 15 kg bags.
Water-dispersion intumescent compound for fire protection of cable lines indoors and outdoors, 20 kg containers.
Water-based intumescent paint for steel structures, R120 (group 2), serves under the open sky without a top enamel.
Intumescent polyurethane foam block for fire protection of cable penetrations, metal pipe penetrations, openings and joints.
Two-component intumescent coating for steel structures, fire protection performance groups 2–4, also tested for hydrocarbon fire.