Stabiterm-300 fire protection mesh for cable lines
Flexible intumescent mesh for fire protection of cable routes, installed without wet processes, 1 × 20 m roll.

Stabiterm-219 combines a water base with resistance to the open atmosphere. The intumescent coating on a water-dispersion binder serves both indoors and outdoors at temperatures from −35 to +50 °C, including in moderately aggressive environments, and it does not need a finishing coat. Fire protection performance is up to group 2 (R120), range 15–120 minutes; the formulation contains no volatile organic compounds. Colour grey, packed in 20 or 25 kg, application temperature from +5 to +40 °C.
| Manufacturer | Stabiterm — OOO NPF Fire Protection Laboratory, Dzerzhinsk |
|---|---|
| Fire protection performance | fire protection performance group 2 (R120); 15–120 min |
| Application | steel structures |
| Service conditions | indoors and in open atmosphere (from −35 °C to +50 °C), moderately aggressive environments; no finishing coat required |
| Base | intumescent paint on a water-dispersion film-forming binder; no VOCs |
| Colour | grey, shade not standardised |
| Packaging | 20 kg or 25 kg |
| Application temperature | from +5 °C to +40 °C |
| Compatible primers and topcoats | no finish required; compatible with primers of other manufacturers |
| Shelf life | 12 months in unopened factory packaging |
| Standards | GOST R 53295-2009; TR EAEU 043/2017 certificate |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Flexible intumescent mesh for fire protection of cable routes, installed without wet processes, 1 × 20 m roll.
Ready-to-use water-based intumescent paint for steel structures, R120 (group 2), white, in a 20 kg pail or can.
Solvent-borne intumescent paint for steel, R120 (group 2), resistant to petroleum products, no finishing coat needed.
Cement-based fire protection mix for steel and concrete, R150 under standard and hydrocarbon fire curves, 15 kg bag.
Thick-film organic-based fire protection compound for steel structures, R150 (group 1), can be applied at −15 °C.
One-component solvent-borne paint for fire protection of steel structures, R120 (group 2), application down to −15 °C.