Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
ALFAPOL PU-3 — polyurethane floor paint
ALFAPOL

ALFAPOL PU-3 — polyurethane floor paint

Polyurethane floors

The PU-3 polyurethane paint coating is applied over PU-1G primer or EP-1GM and EP-1G epoxy primers. The elastic film is resistant to water and chemical media and suits workshops, warehouses, food and pharmaceutical plants, wet rooms and outdoor areas. At +20 °C foot traffic is allowed after 12 hours and full load after 4 days; Taber abrasion is no more than 50 mg.

Specifications

ManufacturerALFAPOL — OOO “ALFAPOL”, Saint Petersburg
Typepolyurethane floors
Useproduction halls, warehouses and logistics, food and pharmaceutical, chemically resistant, wet areas, outdoor areas, retail and public
Basepolyurethane; Polyurethane floor paint
PackagingMetal pail – 14 kg.
Application temperatureApplication temperature, °C: +10°C to +30°C
CuringAt 10 / 20 / 30 °C: foot traffic after 24 / 12 / 6 h, medium load after 3 / 2 / 1 days, full load after 5 / 4 / 2 days; Recoat interval, h, min.: 12
Key propertiesTaber abrasion (CS10/1000 g/1000 rev), max., mg: 50; Bond strength to concrete (failure in concrete), min., MPa: 2; Service temperature, °C: -30 to +50
ConsumptionConsumption, kg/m²: from 0.1; Consumption depends on the absorbency of the substrate, approx. from 100 g/m² per coat.
Shelf lifeShelf life, months: 6
StandardsTU 20.16.56-005-82166262-2017

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by ALFAPOL