Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
ALFAPOL PU-4ShT — polyurethane-cement render for skirtings and coves
ALFAPOL

ALFAPOL PU-4ShT — polyurethane-cement render for skirtings and coves

Polyurethane-cement floors

The PU-4ShT render compound complements polyurethane-cement floors: it is used to form coves, skirtings and protective layers on walls and foundations, and is not itself a floor coating. Shore D hardness is at least 80, compressive strength 45 MPa, flexural strength 14 MPa, bond strength to concrete 2 MPa. The material is resistant to water, chemical media and heat up to +130 °C depending on the version, and can be tinted to RAL with restrictions.

Specifications

ManufacturerALFAPOL — OOO “ALFAPOL”, Saint Petersburg
Typepolyurethane-cement floors
Useproduction halls, warehouses and logistics, car parks and ramps, food and pharmaceutical, chemically resistant, wet areas, outdoor areas
Basepolyurethane-cement; Heat-resistant polyurethane-cement render, compound for coatings and skirtings
ColourTinting to RAL with restrictions
PackagingPlastic containers: Component A – 2.5 kg, Component B – 3 kg. Component C – 25 kg (polypropylene bag).
Application temperatureApplication temperature, °C: +10°C to +25°C
CuringAt 20 °C: foot traffic after 3 days, medium load after 5 days, full load after 7 days; Recoat interval, h, min.: 24; Foot traffic, h, min.: 72
Key propertiesShore D hardness, min.: 80; Compressive strength, MPa: 45; Flexural tensile strength, MPa: 14; Bond strength to concrete (failure in concrete), min., MPa: 2; Service temperature, °C: 6 mm layer -25°C to +80°C, 9 mm layer -40°C to +120°C, 12 mm layer -40°C to +130°C
ConsumptionConsumption at 5 mm layer thickness, kg/m²: 10; 2 kg/m²/mm.
Shelf lifeShelf life, months: 6
StandardsTU 23.64.10-006-82166262-2018

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by ALFAPOL