ALFAPOL
ALFAPOL EP-2 — epoxy self-levelling floor
Solvent-free self-levelling epoxy floor for workshops, retail and public buildings, resistant to water and chemical media.
Price on request
ALFAPOL
ALFAPOL VB-1000(i) — high-strength non-sparking concrete floor
This high-strength non-sparking Portland cement floor is designed for sites where the coating must be put into service quickly: site foot traffic is possible after 4–5 hours. Compressive strength is at least 80 MPa, flexural strength 8 MPa, abrasion up to 0.8 g/cm², frost resistance F400. The coating is waterproof and non-combustible, suitable for workshops, warehouses, car parks, ramps and open areas, and serviceable from −50 to +50 °C.
Specifications
| Manufacturer | ALFAPOL — OOO “ALFAPOL”, Saint Petersburg |
|---|---|
| Type | floor material |
| Use | production halls, warehouses and logistics, car parks and ramps, outdoor areas |
| Base | Portland cement; Non-sparking high-strength concrete floor B70 W20, rapid-hardening non-combustible waterproof finishing coating |
| Colour | the base colour of the coating is grey, tinting possible |
| Packaging | Dry mix ALFAPOL VB® 1000(i): polypropylene bag, 25 kg; crushed granite, fraction 5-10 mm: polypropylene bag, 25 kg |
| Application temperature | Application temperature: from +10°C to +25°C; substrate moisture, max.: 5% |
| Curing | Site foot traffic possible after: 4-5 hours |
| Key properties | Service temperature: from -50 to +50°C; Compressive strength at 28 days, min.: 80 MPa; Flexural tensile strength at 28 days, min.: 8 MPa; Bond strength to concrete, min.: 0.8 MPa; Abrasion, max.: 0.8 g/cm²; Water resistance grade: W2; Frost resistance grade: F400; Max. aggregate size: 10 mm |
| Layer thickness | Single layer thickness: from 25 to 100 mm |
| Consumption | Consumption: 2.26 kg/m²/mm |
| Shelf life | Guaranteed shelf life of the dry mix under normal conditions in intact factory packaging is 6 months from the date of manufacture.; Shelf life: 6 months |
| Standards | TU 5745-009-82166262-2009; combustibility class per GOST 30244-94 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by ALFAPOL
ALFAPOL
ALFAPOL VP BARIT — barite screed for X-ray rooms
Radiation-shielding barite screed on a composite binder for X-ray rooms and other premises with radiation sources.
Price on request
ALFAPOL
ALFAPOL VB-1000 — high-strength rapid-hardening concrete floor
Special-cement concrete floor with compressive strength from 80 MPa and foot traffic after 4–5 hours for workshops, warehouses and car parks.
Price on request
ALFAPOL
ALFAPOL PU-3T AS — antistatic polyurethane sealer
Clear polyurethane sealer with antistatic properties for protecting mineral antistatic floors, fire hazard class KM1.
Price on request
ALFAPOL
ALFAPOL VB ZIMA — concrete floor for laying at low temperatures
Industrial concrete floor that can be laid at −5…+10 °C, for workshops, warehouses, wet rooms and open areas.
Price on request
ALFAPOL
ALFAPOL EP-1GM — epoxy primer for concrete floors
Solvent-free epoxy primer for preparing mineral substrates for polymer floor coatings.
Price on request