BIRSS
BIRSS 59 S2 M700 Moroz — 70 MPa R4 mix placed from −15 to +30 °C
Thixotropic mortar with microfibre for repairing bridges, tunnels and port structures from −15 to +30 °C; at +20 °C it reaches 70 MPa in 28 days.
Price on request
BIRSS
BIRSS 59 Ts — flowable R2 mix for cracks and joints in industrial floors
Non-structural repair of horizontal concrete and reinforced concrete structures is carried out with BIRSS 59 Ts: it is used to fill cracks in industrial floors, for monolithic joining of rigid joints between concrete elements and for low-pressure injection of voids. The non-shrink mortar based on special cements with aggregate up to 0.63 mm is applied only on concrete and reinforced concrete. Class R2 to GOST R 56378; compressive strength 15 MPa after 3 days and 45 MPa at 28 days, water impermeability W 16, F2 200.
Specifications
| Manufacturer | BIRSS — AO Opytny Zavod Sukhikh Smesey (Experimental Dry Mix Plant), Moscow |
|---|---|
| Type | flowable repair mortars |
| Use | floors, industrial buildings |
| Base | BIRSS 59 Ts rapid-hardening dry repair mix is a material based on special cements, high-quality natural fillers and chemical admixtures. When mixed with water it forms a non-shrink, plastic, non-segregating mortar with high water retention and excellent work… |
| Colour | light grey |
| Packaging | bags 25 / 40 kg |
| Application method | BIRSS 59Ts dry mix is intended for non-structural repair of horizontal concrete and reinforced concrete structures: filling cracks in industrial floors; monolithic joining of rigid joints between concrete elements; filling voids by low-pressure injection. SUBSTRATE PREPARATION BIRSS 59 Ts is applied only on concrete and reinforced concrete surfaces. The concrete surface must be clean, sufficiently strong, with open pores, absorbent, and have… |
| Application temperature | +5…+35 °C |
| Key properties | maximum aggregate size, mm: 0.63; workability grade: Rk4/ 18-22; workability retention, min: 30; bond strength to substrate, MPa: 2.0; compressive strength, MPa, not less than - 3/7 days 15/30 - 28 days 45; flexural strength, MPa, not less than - 3/7 days 4/6 - 28 days 7; water impermeability: W 16; frost resistance: F2 200; sulphate resistance coefficient: 0.9; service temperature, °C: from -50 to +70 |
| Standards | class R2 to GOST R 56378; STO 05668056-004-2012 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by BIRSS
BIRSS
BIRSS VRS 600 Moroz — fibre-reinforced R4 mix for high-strength concrete in frost
Thixotropic mix with fibre for columns, beams and balconies at temperatures from −15 to +5 °C; in frost it reaches 55 MPa in compression in 28 days.
Price on request
BIRSS
BIRSS RSM-2M M550 Moroz — R4 repair mix with anti-freeze admixture
Mix for hand repair of joints, cracks and concrete defects without formwork at low and sub-zero temperatures; at +20 °C it reaches 55 MPa in 28 days.
Price on request
BIRSS
BIRSS RSM-1 M450 — thixotropic R4 repair mix with reinforcing fibre
Fibre-reinforced mortar for repairing bridges, tunnels, joints between precast elements and potholes without formwork; compressive 45 MPa at 28 days.
Price on request
BIRSS
BIRSS Grunt Eko Kharts — solvent-free epoxy primer
Environmentally safe solvent-free epoxy primer for self-levelling floors: non-volatile content at least 99 %, bond from 3.9 N/mm².
Price on request
BIRSS
BIRSS Multipol D Ekonom — quartz-filled epoxy self-levelling floor
Economical quartz-filled epoxy self-levelling floor for production halls, warehouses, car parks and retail premises; Shore D hardness 85.
Price on request