BIRSS
BIRSS 34N — cement self-levelling floor M250
Cement finishing self-levelling floor M250 for residential, public and industrial premises; foot traffic after just 8 h.
Price on request
BIRSS
BIRSS VRS 600 Moroz — fibre-reinforced R4 mix for high-strength concrete in frost
Repair of high-strength reinforced concrete at sub-zero temperatures is carried out with BIRSS VRS 600 Moroz, which is applied in the range from −15 to +5 °C. The thixotropic mortar with fibre and compensated shrinkage restores corners of columns and beams and balcony edges destroyed by reinforcement corrosion, surface defects and working joints; it is not recommended as a pourable mortar. Even when hardening at −15 °C the compressive strength at 28 days is 55 MPa, at +20 °C 60 MPa; class R4, W16, F2 400.
Specifications
| Manufacturer | BIRSS — AO Opytny Zavod Sukhikh Smesey (Experimental Dry Mix Plant), Moscow |
|---|---|
| Type | thixotropic repair mortars |
| Use | columns and beams, industrial buildings |
| Base | BIRSS VRS M600 Moroz is a material based on special cements, graded sand, fibre and chemical admixtures. When mixed with water it gives a rheoplastic, non-segregating, rapid-hardening thixotropic mortar with compensated shrinkage. The mortar is plastic… |
| Colour | grey |
| Packaging | bag 25 kg |
| Application method | BIRSS VRS M600 Moroz dry mix is intended for: repairing vertical and horizontal surfaces of reinforced concrete structures made of high-strength concrete; restoring damaged concrete surfaces, corners of columns and beams and balcony edges destroyed by reinforcement corrosion; eliminating surface defects in concrete; filling non-moving (working) joints in concrete. Not recommended for use as a pourable mortar. PACKAGING Paper bag—25 kg From the date of issue of this technical… |
| Application temperature | −15…+5 °C |
| Key properties | maximum aggregate size, mm: 1.25; workability grade: Pk2/4-8; bond strength to substrate, MPa: 2; compressive strength, MPa, not less than At t = -15 °C At t = +20 °C - 1 /7 / 28 days 20 / 50 / 55 35 / 50 / 60; water impermeability: W16; frost resistance: F2 400; sulphate resistance coefficient: 0.9; service temperature, °C: from -50 to +70 |
| Standards | class R4 to GOST R 56378; STO 05668056-004-2012 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by BIRSS
BIRSS
BIRSS RSM-1 M350 — two-component polymer-cement R3 repair system
Two-component mortar for repairing vertical, inclined and overhead concrete areas on bridges and in buildings; placing is possible from −10 °C.
Price on request
BIRSS
BIRSS Kontakt — epoxy impregnation-hardener for concrete floors
Three-component solvent-free epoxy impregnation for fresh and old concrete floors: hardens the surface and slows water evaporation.
Price on request
BIRSS
BIRSS RSM-2M M350 — rapid-hardening fibre-reinforced repair mix
Thixotropic mix with reinforcing fibre for structural repair of bridges, tunnels and joints of precast concrete; 15 MPa in compression after one day.
Price on request
BIRSS
BIRSS 59 S1 M600 — flowable R4 mix for repairing roads, bridges and airfields
Non-shrink pourable mortar for road pavements, runways, bridges, car parks and equipment foundations; 60 MPa at 28 days.
Price on request
BIRSS
BIRSS 59 S2 M600 Moroz Uskorennaya — R4 mix gaining 20 MPa in 2 hours at +20 °C
Accelerated-hardening thixotropic mortar for repairing bridges, tunnels and joints at temperatures from −10 °C; 20 MPa after 2 hours at +20 °C.
Price on request