Defender W (VD-AK-222) fire protection paint for timber
Water-based thin-film fire protection paint for timber and wood-based materials, fire protection performance group 1.

Power and control cables, as well as communication cables with PVC, rubber or metal sheathing, are coated with Defender CS. It is a thin-film material on an organic binder; it can be applied and transported at temperatures from −25 to +35 °C. In premises without an aggressive environment the coating is used on its own. If the environment is slightly or moderately aggressive, and also outdoors and under a canopy in any climate, it is covered with a topcoat whose grade is agreed with the manufacturer.
| Manufacturer | Defender (Evrostil) — OOO Evrostil Laboratory, Moscow Region |
|---|---|
| Application | cable lines |
| Service conditions | indoors in a non-aggressive environment; with slightly/moderately aggressive environments, outdoors and under a canopy, all atmosphere types and climatic zones: with a topcoat |
| Base | thin-film organic-based compound |
| Application temperature | application and transport from −25 °C to +35 °C |
| Compatible primers and topcoats | selection to be agreed with Evrostil |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Water-based thin-film fire protection paint for timber and wood-based materials, fire protection performance group 1.
Thin-film epoxy compound with fire protection and anti-corrosion properties for steel outdoors and in premises of any humidity.
One-component solvent-borne paint for fire protection of steel from 15 to 120 minutes (groups II–VII), 25 kg euro pail.
Fire and bio-protective impregnation for unpainted timber, both indoors and outdoors.
Water-based fire protection paint for steel structures indoors, up to 90 minutes; applied only over primed steel.
Thick-film epoxy compound for structural fire protection of steel, for outdoors and environments of any aggressiveness.