Defender W (VD-AK-222) fire protection paint for timber
Water-based thin-film fire protection paint for timber and wood-based materials, fire protection performance group 1.

Defender ME combines fire protection and anti-corrosion protection of steel: the thin-film epoxy compound can be applied as a single coat, without a primer or protective enamel, or included in a multi-coat system. The coating is suitable for outdoors at any humidity and in any type of atmosphere, for canopies, and for heated and cold buildings, from dry to wet regimes. The main industries are oil refining, gas, chemical, nuclear and mining; the coating is designed for at least 30 years.
| Manufacturer | Defender (Evrostil) — OOO Evrostil Laboratory, Moscow Region |
|---|---|
| Application | steel structures |
| Service conditions | outdoors in all humidity zones and all atmosphere types, under a canopy, heated and unheated premises (dry, normal, humid, wet regimes) |
| Base | epoxy-based; thin-film fire protection and anti-corrosion compound |
| Compatible primers and topcoats | single-coat system or as a system with anti-corrosion primers and finishes |
| Standards | 123-FZ; GOST R 53295; anti-corrosion properties: group IV per SP 28.13330 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Water-based thin-film fire protection paint for timber and wood-based materials, fire protection performance group 1.
Water-based fire protection paint for steel structures indoors, up to 90 minutes; applied only over primed steel.
One-component solvent-borne paint for fire protection of steel from 15 to 120 minutes (groups II–VII), 25 kg euro pail.
Fire and bio-protective impregnation for unpainted timber, both indoors and outdoors.
Fire protection coating on an organic binder for power, control and communication cables; applied from −25 °C.
Thick-film epoxy compound for structural fire protection of steel, for outdoors and environments of any aggressiveness.