Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
Elakor-ED Grunt-2K/100P — solvent-free pore-filling epoxy primer
ELAKOR

Elakor-ED Grunt-2K/100P — solvent-free pore-filling epoxy primer

Floor primers

This solvent-free primer with 100 % non-volatiles closes the pores of concrete, sand concrete, cement self-levelling floors, tile, stone and brick before epoxy and polyurethane coatings are applied. With sand it becomes a filler, and with sand and a special additive — a compound for skirtings and reveals. Adhesive strength to M750 concrete is 6.7 MPa with failure in concrete; the film withstands exposure to water and xylene for at least 48 hours.

Specifications

ManufacturerElakor — OOO “TEOKHIM-PROM”, Moscow Region
Typefloor primers
Useproduction workshops, warehouses and logistics, car parks and ramps, retail and public premises, wet rooms
Basetwo-component solvent-free epoxy pore-filling primer (100% non-volatiles); composition: epoxy resin, hardener, filler, functional additives
Packaging“A” + “B” = Kit 20 kg + 5 kg = 25 kg
Application methodPriming under epoxy and polyurethane coatings; filling (with sand); forming skirtings and reveals (with sand and a special additive). Substrates: concrete, sand concrete, cement self-levelling floors, tile, stone, brick. Surface moisture not more than 4 wt%, relative air humidity not more than 80%, surface temperature 3°C above the dew point; on the lowest floors – waterproofing against rising damp; preparation – removal of laitance/weak layer by grinding or shot blasting. Flat trowels; a roller is permitted.
Application temperatureair and surface: from +5°C to +25°C; material: from +10°C to +20°C
Curingpot life at 20.0±2.0 °C at least 30 min; drying to degree 3 not more than 8 h
Key propertiesA:B ratio by weight 4 : 1 (may vary, see the label); non-volatiles 100%; mix density 1.3 kg/l; adhesive strength to concrete M750 (B55) 6.7 MPa (failure in concrete, GOST 22690-88); adhesion to glass not more than 1 point; film resistance to static exposure to water at least 48 h, xylene at least 48 h, butyl acetate at least 24 h (at (20±2)°C); chemical resistance: water, salt and alkali solutions of any concentration, acid solutions up to 10-20%, oils and fats of all kinds, organic solvents, petrol, diesel fuel
Shelf lifestore and transport at temperatures from 0° to +25°C
StandardsFire safety certificate “Elakor-ED”; ROSTEST letter “Elakor-ED”

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by ELAKOR