Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
Elakor-PU Emal-60 Semi-Gloss — polyurethane paint for concrete floors
ELAKOR

Elakor-PU Emal-60 Semi-Gloss — polyurethane paint for concrete floors

Polyurethane floors

The base paint of the range cures by air moisture and gives a semi-gloss film with a gloss of 45–55 %, resistant to water, oils, salt and alkali solutions. On primed concrete or wood it is used to make coloured paint-on floors, quartz-filled and anti-slip coatings, and decorative floors with chips and flakes. Base colour is grey RAL 7035 or 7040, tinting to RAL; Shore D hardness 75–78, frost resistance at −60 °C at least 75 cycles, fire hazard class KM1.

Specifications

ManufacturerElakor — OOO “TEOKHIM-PROM”, Moscow Region
Typepolyurethane floors
Useproduction workshops, warehouses and logistics, car parks and ramps, retail and public premises, chemically resistant, wet rooms, food and pharmaceutical, decorative
Basemoisture-curing one-component polyurethane paint (enamel); composition: urethane prepolymers, organic solvents, pigments, functional additives
Colourbase colour – grey (RAL7035 or 7040); tinted to the RAL chart; semi-gloss
Packagingmetal pail 22 kg
Application methodProtection of concrete and wooden floors, walls, structures; coloured paint-on PU floors, quartz-filled and anti-slip coatings, decorative floors with chips, flakes, glitter. On surfaces primed or filled with polyurethane and epoxy materials. Rollers, brushes (solvent-resistant), airless spraying; 2 coats (additional coats permitted). Surface moisture not more than 4 wt%, relative air humidity not more than 80%, surface 3°C or more above the dew point.
Application temperatureair and surface: from -30°C to +25°C; material temperature: from +10°C to +25°C
Curingdrying to degree 3 at +20°C – not more than 6 h; drying between coats above 0°C – 4-8 h, but not more than 24 h; below 0°C – 16-24 h, but not more than 48 h
Key propertiesviscosity (VZ-4 cup) at +20°C 30-45 s; solids content at least 59%; density 1.07 g/cm³; service temperature range from -60°C to +120°C (up to 30 min – up to +180°C); water absorption not more than 0.1%; film tensile strength at least 65 MPa; elongation at least 20%; impact strength (U-2M) 100 cm, reverse impact 100 cm; hardness (ME-3/TML) at least 0.6/0.4 relative units; Shore D at 28 days 75-78; flexibility not more than 1 mm; gloss at 60° 45-55% (semi-gloss); adhesion to concrete M350 (B25) 2.7 MPa (failure in concrete), to magnesia concrete 3.68 MPa; abrasion resistance 37 kg/µm (GOST 20811, method A), 1.5 (0.00015) g/m² (g/cm²) (method B); Taber abrasion CS-10, 1000 g, 28 days – 9 mg; resistance to climatic factors 1 point (GOST 9.401 method 2); frost resistance at -60°C at least 75 cycles; fire hazard class of paint coatings KM1; chemical resistance: water, salt and alkali solutions of any concentration, acid solutions up to 10-20%, oils and fats of all kinds, organic solvents, petrol, diesel fuel
Consumption120-170 g/m² per coat (depends on surface roughness), 2 coats; for colours RAL 1016, 1018, 2003, 2004, 2008, 2009, 2011, 3000, 3001, 3002, 3013, 3016, 3020, 3028, 3031, 6037 (insufficient hiding power) – first 1 coat of Emal-60 White, consumption 100-120 g/m²
Shelf life6 months in the manufacturer's original packaging; store and transport at temperatures from -40°C to +25°C
StandardsCertificate of conformity (fire safety); Certificate of conformity; Approval for use in children's and healthcare institutions; NIKIMT report “Decontaminability and radiation resistance”.

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by ELAKOR