Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
Elakor-ED Stone Carpet Adhesive — lightfast epoxy adhesive-binder
ELAKOR

Elakor-ED Stone Carpet Adhesive — lightfast epoxy adhesive-binder

Other floor materials

This thixotropic binder with increased UV resistance bonds quartz sand, pebbles, gravel, granite and marble screenings into a “stone carpet” for paths, paved areas, decorative coatings and products. For large volumes the adhesive is mixed with the filler in a concrete mixer and spread over the substrate immediately. The substrate is concrete or sand-cement screed of at least M200, at least 28 days old, primed with “Elakor-ED” epoxy primer; permissible working temperature from +5 to +22 °C, fire hazard class KM2.

Specifications

ManufacturerElakor — OOO “TEOKHIM-PROM”, Moscow Region
Typefloor material
Useoutdoor areas, decorative
Basetwo-component thixotropic epoxy binder with increased UV resistance for stone chippings, sand, pebbles; composition: epoxy resin, hardener, functional additives
Colourfilm hard, flexible, glossy, uniform
Application methodFramework coatings and products (“stone carpet”) of quartz sand, pebbles, gravel, granite and marble screenings. Substrate: concrete or sand-cement screed at least M200, cured for at least 28 days, moisture not more than 4 wt%, primed with “Elakor-ED” epoxy primer; preparation – grinding or shot blasting. Relative air humidity not more than 80%, surface 3°C above the dew point. For large volumes mix with the filler in a drum (“pear”) concrete mixer; spread the ready mix immediately.
Application temperaturesurface and air: optimum +15°C…+22°C; permissible +5°C…+22°C; materials: optimum +15°C to +20°C, permissible +10°C…+20°C
Curingdrying time to degree 3 at (20±2)°C not more than 8 h
Key propertiesA:B ratio by weight 100:55 (may vary); solids content 100%; density 1.06±0.02 kg/l; adhesion to glass 1 point; film resistance to static exposure to water at least 48 hours, xylene at least 48 hours, butyl acetate at least 24 hours; lightfastness on the “Lightfastness Scale” – 5 (good); fire hazard class KM2; chemical resistance: water, salt and alkali solutions of any concentration, acid solutions up to 10-20%, oils and fats of all kinds, organic solvents, petrol, diesel fuel
Consumptionper 1 part by weight of Binder – 10-25 parts by weight of Filler (depending on the fraction)
Shelf lifestore and transport at temperatures from 0° to +25°C
StandardsFire safety certificate “Elakor-ED”; ROSTEST letter “Elakor-ED”

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by ELAKOR