Khimtek
KhS-759 Khimtek — enamel for acid, alkali and salt media
Enamel for railway wagons, tank cars, equipment and structures in acid, alkali, salt and aggressive gas media, applied over KhS-059 or KhS-010 primer.
Price on request
Khimtek
YARFAST®-0962 primer-enamel for aggressive media — resistant to hot alkalis
The YARFAST®-0962 primer-enamel is intended for metal and reinforced concrete structures of chemical and petrochemical plants and is resistant to hot alkali solutions. It features enhanced adhesion, including to tight rust, and forms a stand-alone coating. The material is two-component, and the pot life of the mixture is 24 h; it is applied by air and airless spray, electrostatic spraying or brush.
Specifications
| Manufacturer | Khimtek — OOO PO “Khimtek”, Yaroslavl |
|---|---|
| Type | primer-enamels |
| Use | steel structures, concrete, chemical plants, oil and gas |
| Base | Two-component: pigments and fillers in a solution of film formers in organic solvents + hardener |
| Application method | air and airless spray, electrostatic spraying, brush; thinning with R-4, R-4A, R-5, R-5A |
| Drying | painting 30 min after mixing; pot life 24 h |
| Key properties | Base:hardener ratio by weight: 100:15, Resistance: water, 3 % NaCl, industrial oil, petrol — 72 h, Resistance to hot alkali solutions, Enhanced adhesion, incl. to tight rust |
| Compatible materials | stand-alone coating |
| Shelf life | 12 months from the date of manufacture |
| Standards | TU 20.30.12-048-81922626-20 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Khimtek
Khimtek
KhV-0278 Khimtek — perchlorovinyl primer-enamel over rust and mill scale
One-component primer-enamel with a rust modifier for equipment and steel structures, applied over mill scale, rust and old coatings.
Price on request
Khimtek
YARFAST® alkyd-urethane enamel — topcoat over YARFAST® primer
One-component alkyd-urethane enamel for metal, concrete and reinforced concrete surfaces in an open industrial atmosphere.
Price on request
Khimtek
YARFAST®-0715 primer-enamel — coating for steel, aluminium and galvanised surfaces
Primer-enamel for steel, aluminium and galvanised surfaces, including the inside of metal tanks for water and petroleum products.
Price on request
Khimtek
FASTTEK® anticorrosion primer-enamel — for service from −40 to +130 °C
Quick-drying primer-enamel on a combined binder for mechanical engineering, equipment and structures, service from −40 to +130 °C.
Price on request
Khimtek
KhS-010 Khimtek — primer based on a vinylidene chloride–vinyl chloride copolymer
Primer for equipment, metal and concrete structures in acid and alkali media up to 60 °C, coating service life up to 15 years.
Price on request