YARFAST®-0962 primer-enamel for aggressive media — resistant to hot alkalis
Two-component primer-enamel for structures of chemical and petrochemical plants, resistant to hot alkalis, with adhesion to tight rust.
Zn-YARFAST®-0561 is a zinc-rich primer made from a base (zinc powder in an epoxy resin solution) and the Zn-YARFAST® hardener, which are mixed in a ratio of 100:5.9. It is intended for steel structures and works on its own or as a primer in coating systems. After mixing, the composition is left to stand for 30 min; the pot life of the mixture is 12 h. At 20 °C the coating withstands water, 3 % NaCl solution and petrol for at least 72 h.
| Manufacturer | Khimtek — OOO PO “Khimtek”, Yaroslavl |
|---|---|
| Type | zinc-rich primers |
| Use | steel structures |
| Base | Zinc powder in a solution of epoxy resin in organic solvents; base + Zn-YARFAST® hardener |
| Colour | grey |
| Packaging | 25 kg, 60 kg |
| Application method | air or airless spray, brush, roller |
| Drying | standing time 30 min after mixing; pot life of the mixture 12 h |
| Key properties | Base:hardener ratio: 100:5.9 parts, Resistance at 20 °C: water, 3 % NaCl, petrol — at least 72 h, Surface preparation: GOST 9.402 (cleaning degree 2, degreasing degree 1) or Sa 2½ / St 3 |
| Compatible materials | on its own or in coating systems; Zn-YARFAST® thinner up to 5 % |
| Shelf life | 6 months from the date of manufacture; storage from −40 to +40 °C |
| Standards | TU 2312-050-81922626-2020 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Two-component primer-enamel for structures of chemical and petrochemical plants, resistant to hot alkalis, with adhesion to tight rust.
Wear-resistant primer-enamel for ferrous metal, concrete and concrete floors of production and storage premises, dries in no more than 30 minutes.
Quick-drying primer-enamel for repair painting of large steel structures, pipes and rusty surfaces, applied over spot rust.
Enamel for railway wagons, tank cars, equipment and structures in acid, alkali, salt and aggressive gas media, applied over KhS-059 or KhS-010 primer.
Alkyd primer for steel structures and equipment under GF, PF, EP, MS, ML and AU enamels, also used as a transit primer.
Organosilicon enamel for steam pipelines, heat pipelines, oil pipelines, chimneys and steel structures, heat resistance from −60 to +600 °C.