Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
IZOLEP-WP-33 — polyurethane finish enamel of the bridge waterproofing system
VMP

IZOLEP-WP-33 — polyurethane finish enamel of the bridge waterproofing system

Mastics and liquid membranesPolyurethane enamels

A two-component polyurethane enamel that completes the waterproofing system for bridge superstructure slabs IZOLEP-WP-01 + IZOLEP-WP-11 + IZOLEP-WP-33. It is applied over the IZOLEP-WP-11 membrane not earlier than 24 h and not later than 3 days at 20 °C; the coating is resistant to weathering, including ultraviolet, and serves as a protective and decorative finish coat. The enamel gives a semi-gloss grey or light grey surface and is applied by airless spray without thinning, by brush or by roller.

Specifications

ManufacturerVMP — AO “NPKh VMP”, Yekaterinburg
Typepolyurethane enamels
Usebridges, concrete
Basepolyurethane, two-component (base and hardener)
Colourgrey or light grey; semi-gloss
Packagingkit: base and hardener in metal pails
Application methodairless spray without thinning (nozzle 0.011–0.015″, at least 15 MPa), brush, roller (SOLV-EP up to 5 % by weight); base : hardener 100:33.3 by weight
Application temperaturefrom +5 to +30 °C, relative humidity max. 80 %; substrate at least 3 °C above the dew point; material at least +15 °C
Dryingto degree 3 — no more than 5 h at 20 °C; to the next coat of enamel — at least 12 h at 20 °C and humidity 65 %; pot life at least 1 h at 20 °C
Key propertieshigh decorative properties
Compatible materialsfinish coat over IZOLEP-WP-11 waterproofing (holding time of IZOLEP-WP-11 at least 24 h and no more than 3 days at 20 °C); system IZOLEP-WP-01 + IZOLEP-WP-11 + IZOLEP-WP-33
Shelf life12 months from the date of manufacture
StandardsTU 20.30.22-167-12288779-2025

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by VMP