Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
Akvastoun 2 SPRINT (UV) — water-polyurethane floor primer-enamel
KRASKO

Akvastoun 2 SPRINT (UV) — water-polyurethane floor primer-enamel

Polyurethane floors

The enamel is self-priming and does not need a separate primer, although for a longer service life it can be laid over Akvastoun-2MS primer-impregnation. UV-resistant pigments make the coating lightfast at entrance areas, on stairs and driveways, and the absence of odour allows work in medical and educational facilities. The floor can be walked on after 12 h and put into service after 72 h; the service life of the coating is at least 5 years.

Specifications

ManufacturerKRASKO — OOO “NPO KRASKO”, Moscow Region
Typepolyurethane floors
Useproduction halls, warehouses and logistics, car parks and ramps, wet rooms, outdoor areas, retail and public
BaseTwo-component water-polyurethane primer-enamel: water-based acrylic dispersion and aromatic isocyanate hardener; UV-resistant pigments
ColourGloss (gloss at 60° 60–90 GU); RAL 7040, Base A; tinting to RAL Classic, NCS Index, Symphony
Packagingper the description — 22 kg and by agreement with the customer
Application methodSelf-priming, no prior priming; for a longer service life — over Akvastoun-2MS primer-impregnation. Can be applied to concrete with residual moisture up to 15 %. Preparation to SP 71.13330.2017; brush, roller, spray gun, airless spraying; wet film 100 µm ≈ 50 µm dry; second coat no earlier than after 2 h; relative humidity not more than 80 %; pot life at least 3 h; clean tools with water.
Application temperaturefrom +5 °C to +35 °C
CuringDrying to degree 3 at (20±2) °C — not more than 2.0 h; foot traffic — after 12 h; commissioning — after 72 h; service properties at 20 °C — after 3 days
Key propertiesNon-volatile content by weight comp. A 55–57 %, comp. B 96–100 %; density of comp. A 1.30–1.40 g/cm³; adhesion to concrete at least 1.3 MPa; gloss at 60° 60–90 GU; hiding power not more than 200 µm; resistance to water at least 72 h; service temperature from −50 °C to +80 °C; service life at least 5 years
Layer thicknessDry film on a non-porous substrate 50 µm (finish over primer) and 100 µm (standalone coating); wet film 100 µm ≈ 50 µm dry
Consumption150–300 g/m²
Shelf life9 months from the date of manufacture; storage from +4 °C to +40 °C
StandardsTU 20.30.11-041-01524656-2020; preparation to SP 71.13330.2017

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by KRASKO