KRASKO
Epoksipol-2 — epoxy self-levelling floor for damp concrete
Self-levelling epoxy floor without organic solvents that can be laid on fresh concrete with a moisture content of up to 15 %.
Price on request
KRASKO
Epoksipol-2 “COMFORT” — high-strength epoxy floor enamel
The enamel uses a dearomatised thinner, so painting can be done without stopping production, including in food and pharmaceutical facilities. The coating is impact-resistant, withstands wheeled traffic and wet cleaning, and is resistant to acids and petrochemicals, and to water and fuels and lubricants for at least 72 h. It is applied over Epoksol-2MS primer on concrete of at least M250, the second coat after 8–12 h; the coating reaches full strength in 5 days.
Specifications
| Manufacturer | KRASKO — OOO “NPO KRASKO”, Moscow Region |
|---|---|
| Type | epoxy floors |
| Use | production halls, warehouses and logistics, food and pharmaceutical, chemically resistant, retail and public |
| Base | Two-component epoxy enamel: modified high-molecular epoxy resin, strengthening components, dearomatised thinner |
| Colour | Semi-gloss; RAL 7040 (per the description), grey |
| Packaging | 27 kg (available from one package) |
| Application method | Concrete at least M250; finish coat over Epoksol-2MS epoxy primer. Substrate: compressive/pull-off strength at least 20/1.5 MPa, moisture not more than 5 %; grinding. Thinning with xylene, R-universal; roller for rough surfaces, brush; mixing and application — within 30 min at 20 °C; second coat after 8–12 h. |
| Application temperature | not below +5 °C |
| Curing | Drying to degree 3 at 20 °C — not more than 12 h; foot traffic — 24 h (100 µm) / 36 h (200 µm); final strength development — 5 days |
| Key properties | Solids by volume comp. A 99 %; hiding power (dry film basis) not more than 80 g/m²; film impact strength at least 50 cm, bending not more than 2 mm; resistance to water and fuels and lubricants at least 72 h; service temperature from −40 °C to +100 °C |
| Layer thickness | 100 or 200 µm dry film |
| Consumption | 160–200 g/m² at 100 µm; 350–400 g/m² at 200 µm (theoretical consumption A+B) |
| Shelf life | 12 months from the date of manufacture; storage from −30 °C to +40 °C |
| Standards | TU 20.30.12-004-01524656-2017; state registration certificate; preparation to SP 29.13330.2011 and SP 71.13330.2017 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by KRASKO
KRASKO
Teksipol — wear-resistant alkyd-urethane enamel for concrete
Non-slip alkyd-urethane enamel with micronised marble for concrete floors and screeds under increased abrasive loads.
Price on request
KRASKO
Proteksil — deep-penetrating strengthening impregnation for concrete
Clear dustproofing impregnation for new, old and low-grade concrete; penetrates up to 10 mm and can be applied at temperatures down to −20 °C.
Price on request
KRASKO
Epoksol-2MS — strengthening epoxy primer for concrete floors
Multi-purpose epoxy primer free of aromatic solvents: strengthens and dustproofs concrete and serves as a bonding layer for polymer floors.
Price on request
KRASKO
Epostoun — water-epoxy enamel for concrete floors
Vapour-permeable water-epoxy enamel without solvent odour for fresh and damp concrete in dry and wet rooms.
Price on request
KRASKO
Epoksol-2MS SPRINT — fast-drying epoxy primer
Fast-drying strengthening epoxy primer: the finish coat can be applied after just 2 h, and work proceeds without stopping production.
Price on request