KRASKO
Proteksil — deep-penetrating strengthening impregnation for concrete
Clear dustproofing impregnation for new, old and low-grade concrete; penetrates up to 10 mm and can be applied at temperatures down to −20 °C.
Price on request
KRASKO
Epostoun-Ultra — gloss water-epoxy floor enamel
Epostoun-Ultra gives a gloss coating that withstands water and fuels and lubricants for 240 h. The enamel is laid over Epoksol water-epoxy primer-impregnation on freshly laid concrete with moisture up to 15 % or old concrete of at least M250; it is used indoors and outdoors under cover, out of direct sunlight. The coating is vapour-permeable, odourless and free of organic solvents, and reaches final strength in 7 days.
Specifications
| Manufacturer | KRASKO — OOO “NPO KRASKO”, Moscow Region |
|---|---|
| Type | epoxy floors |
| Use | production halls, warehouses and logistics, wet rooms, retail and public |
| Base | Two-component water-epoxy enamel: liquid epoxy resin with pigments and mineral fillers, cured by an aqueous dispersion of amine-containing resin; free of organic solvents |
| Colour | Gloss; grey, RAL 7040 (per the description) |
| Packaging | 22 kg |
| Application method | Over freshly laid (moisture not more than 15 %) or old concrete of at least M250; finish coat over Epoksol water-epoxy primer-impregnation. Substrate: compressive strength at least 20 MPa, pull-off strength at least 1 MPa, moisture 14–15 %; grinding. Pour component A into component B; thinning with water; roller for rough surfaces; mixing and application — within 1.5–2 h at 20 °C; second coat no earlier than after 20 h and no later than after 48 h. Indoors and outdoors under cover, out of direct sunlight. |
| Application temperature | not below +10 °C |
| Curing | Drying to degree 3 at 20 °C — not more than 20 h; foot traffic — after 48 h (200 µm layer); final strength development — 7 days |
| Key properties | Solids by volume 65 %; conventional viscosity by VZ-246 cup (nozzle 6) 200–400 s; hiding power (dry film basis) 80 g/m²; fineness of grind not more than 80 µm; resistance to water 240 h, to fuels and lubricants 240 h (colour and gloss changes are permissible under prolonged exposure); vapour-permeable coating |
| Layer thickness | Dry film 200 µm; single application up to 200 µm |
| Consumption | 350–400 g/m² at 200 µm (theoretical consumption A+B) |
| Shelf life | 6 months from the date of manufacture; storage from +5 °C to +35 °C |
| Standards | TU 20.30.12-004-01524656-2017; expert opinion; preparation to SP 29.13330.2011 and SP 71.13330.2017 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by KRASKO
KRASKO
Akvopol — acrylic paint for concrete floors
Odourless waterborne acrylic paint for concrete floors and screeds under normal and medium loads, including in wet rooms.
Price on request
KRASKO
Akvastoun 2 SPRINT (UV) — water-polyurethane floor primer-enamel
Lightfast odourless water-polyurethane primer-enamel for concrete indoors and outdoors, including on damp substrates up to 15 %.
Price on request
KRASKO
Teksipol “3 in 1” Ekspert — primer-enamel for concrete, applied down to −30 °C
Dustproofing “3 in 1” primer-enamel on siliconised resin for concrete indoors and outdoors; second coat after 30 min, in winter down to −30 °C.
Price on request
KRASKO
Akvastoun “2 in 1” SPRINT — waterborne primer-enamel for concrete floors
Fast-drying odourless waterborne primer-enamel applied without a separate primer, including on damp concrete.
Price on request
KRASKO
Epokhim Nefteprom-300S — 3-in-1 epoxy coating for oil tanks
Thixotropic epoxy primer-enamel for the inner surfaces of tanks with crude oil, fuel, oils, acids and alkalis, without priming.
Price on request