Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
Polimerstoun-1 S80 — gloss polyurethane enamel for heavy-duty floors
KRASKO

Polimerstoun-1 S80 — gloss polyurethane enamel for heavy-duty floors

Polyurethane floors

S80 enamel is designed for intensive, deformation and impact loads and is also used for thin-layer self-levelling floors. The coating is impermeable to water and process fluids and resistant to chemicals, petrol, oils and detergents; wear per ASTM D 4060 is not more than 70 mg. Besides warehouses, car parks and chemical plants, the enamel is used to protect pipelines, water tanks and swimming pools.

Specifications

ManufacturerKRASKO — OOO “NPO KRASKO”, Moscow Region
Typepolyurethane floors
Useproduction halls, warehouses and logistics, car parks and ramps, chemically resistant, retail and public
BaseOne-component polyurethane enamel; base — polyurethane prepolymer
ColourGloss; Base A, Base C, RAL 7040; other colours to order from one pail
Packaging25 kg
Application methodConcrete at least M250; prior priming with PS-Grunt is recommended (enamel 16–20 h after priming), for very porous and weak concrete — Proteksil impregnation. Substrate: compressive strength at least 20 MPa, pull-off strength at least 1.5 MPa, moisture not more than 4 %; grinding. Ready to use, no thinning; fur roller (hard-to-reach areas — by brush), 1–2 coats, recoat drying 16–20 h at (20±2) °C.
Application temperaturenot below +5 °C
CuringDrying to degree 3 at 20 °C — not more than 3 h; foot traffic — not more than 24 h; final strength development — 7 days
Key propertiesSolids by volume 70–80 %; conventional viscosity by VZ-246 cup (nozzle 4) 60–110 s; adhesion to concrete at least 2.5 MPa; abrasion resistance to GOST 20811-75 (method A) at least 5 kg; wear index per ASTM D 4060 not more than 70 mg; film hardness after 72 h by M-1 pendulum 0.55 conventional units; fineness of grind not more than 60 µm; resistance to petrol and oils at least 24 h, to water 48 h
Consumption150–250 g/m² (theoretical)
Shelf life6 months from the date of manufacture; storage from −10 °C to +35 °C
StandardsTU 20.30.12-002-01524656-2017; GOST 20811-75 (method A); ASTM D 4060 (“ATSM D 4060” in the description); preparation to SNiP 2.03.13-88 and SNiP 3.04.03-87

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by KRASKO