Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
Tistrom-2MS — two-component polyurethane floor varnish
KRASKO

Tistrom-2MS — two-component polyurethane floor varnish

Sealers and topcoats

This two-component varnish seals the pores of concrete, dustproofs and strengthens it, and on finished polyurethane and epoxy floors serves as an extra protective layer. Light foot traffic is allowed after just 1.5–2 h, final strength after 7 days; the varnish can be applied at +2…+30 °C indoors. The coating is resistant to fuels and lubricants and alkalis: water and mineral oil — at least 14 days, petrol on concrete — at least 10 days.

Specifications

ManufacturerKRASKO — OOO “NPO KRASKO”, Moscow Region
Typesealers and finish coats
Useproduction halls, warehouses and logistics, car parks and ramps, retail and public, decorative
BaseTwo-component polyurethane varnish: modified high-molecular polyurethane resins, targeted and process additives, solvent
ColourGloss, clear (slight amber tint in a thick layer)
Packaging20 kg
Application methodConcrete and terrazzo floors, cement screeds, stone; extra protection of polyurethane and epoxy polymer floors, and of concrete under acrylic or polyurethane enamel (over epoxy coatings — trial application; not for waterborne coatings). Substrate: compressive/pull-off strength at least 20/1.5 MPa, moisture not more than 4 %; grinding; relative air humidity not more than 80 %. No thinning; roller for rough surfaces, brush; on concrete 1–3 coats, on polymer substrates 1 coat; recoat drying 50 min; pot life at least 1 h. Indoors.
Application temperaturefrom +2 °C to +30 °C
CuringDrying to degree 3 at 20 °C — 1.5 h; light foot traffic — after 1.5–2 h; final strength development — 7 days
Key propertiesDensity 0.84 g/cm³; conventional viscosity of the mix by VZ-4 cup 15–20 s; resistance: water at least 14 days, mineral oil at least 14 days, petrol (on concrete) at least 10 days, 10 % NaOH at least 5 days
Layer thicknessConsumption is given for a wet film of 100 µm
Consumption50–150 g/m² (at a wet film of 100 µm; actual consumption depends on the surface)
Shelf life12 months from the date of manufacture; storage from +5 °C to +35 °C
Standardspreparation to SP 29.13330.2011 and SP 71.13330.2017

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by KRASKO