KRASKO
Epoksipol-2 — epoxy self-levelling floor for damp concrete
Self-levelling epoxy floor without organic solvents that can be laid on fresh concrete with a moisture content of up to 15 %.
Price on request
KRASKO
Teksipol Ekspert Antistatik — antistatic primer-enamel for concrete floors
The coating dissipates static charge without ‘blind spots’, reduces the risk of sparking and protects sensitive equipment, which is why it is used in the oil and gas, chemical and mining industries, instrument making, grain stores and elevators. The enamel is matt and non-slip, UV-resistant, and also strengthens and dustproofs concrete. It is applied in two coats even at −30 °C; at 20 °C the second coat goes on after 30 min.
Specifications
| Manufacturer | KRASKO — OOO “NPO KRASKO”, Moscow Region |
|---|---|
| Type | floor material |
| Use | antistatic/conductive, production halls, warehouses and logistics, outdoor areas |
| Base | One-component primer-enamel on a blend of modified resins with special functional components |
| Colour | Matt, non-slip; grey (description), RAL 7040 |
| Packaging | 20 kg |
| Application method | Concrete floors, precast reinforced concrete products, cement screeds, indoors and outdoors. Substrate: compressive/pull-off strength at least 20/1.5 MPa, moisture not more than 4 %; grinding. Brush/roller — no thinning, 2 coats (the first as a primer), recoat drying 30 min at 20 °C (2 h at −30 °C); air spraying (nozzle 1.4–2.0 mm, 2–2.5 bar) with xylene not more than 10 %, 2 coats. |
| Application temperature | not below −30 °C |
| Curing | Drying to degree 3 at 20 °C — not more than 30 min; foot traffic — not more than 12 h; final strength development — 7 days |
| Key properties | Solids by volume 50–60 %; conventional viscosity by VZ-246 cup (nozzle 4) 40–80 s; adhesive strength at least 1 MPa; hardness by TML-TM-1 at least 0.4; resistance to 3 % NaCl at least 48 h, oils at least 48 h, water at least 120 h; electrical resistance values are not given in the description |
| Consumption | 200–250 g/m² (theoretical) |
| Shelf life | 6 months from the date of manufacture; storage from −30 °C to +35 °C |
| Standards | TU 20.30.12-051-01524656-2020; state registration certificate; preparation to SNiP 2.03.13-88 and SNiP 3.04.03-87 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by KRASKO
KRASKO
Tistrom — wear-resistant polyurethane varnish for concrete
Gloss one-component polyurethane varnish for concrete and terrazzo floors, tiles and stone indoors and under cover.
Price on request
KRASKO
Epolast SPRINT — fast-drying epoxy self-levelling floor
Epoxy self-levelling floor that can be walked on after 4 h and opened to cars after 6 h; solvent-free and without a pungent odour.
Price on request
KRASKO
Teksipol — wear-resistant alkyd-urethane enamel for concrete
Non-slip alkyd-urethane enamel with micronised marble for concrete floors and screeds under increased abrasive loads.
Price on request
KRASKO
Polibetol-Grunt — polyurethane primer for concrete floors
One-component strengthening polyurethane primer with almost no odour for Polibetol series enamels; applied from −5 °C.
Price on request
KRASKO
Poliuretol 80S (UV) — 3-in-1 polyurethane primer-enamel with titanium particles
Gloss 3-in-1 polyurethane primer-enamel for steel structures, bridges and tanks; applied over a primer or without one, works from −50 to +90 °C.
Price on request