Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
MASTERBENT® bentonite mat — waterproofing of foundations and underground structures
BentIzol

MASTERBENT® bentonite mat — waterproofing of foundations and underground structures

Bentonite waterproofing

The MASTERBENT® line is intended for building waterproofing: foundations, including those of private houses, basements, car parks, tunnels, trafficable roofs, wells and the outer shell of pools. The mat is fixed to a finished structure with dowels or to the inner side of the formwork with a stapler; the substrate may be damp, and when cast together the bond to concrete is at least 0.17 MPa. In addition to 5.0 × 40 m rolls, compact rolls of 1.15 × 5 m weighing 31 kg and 2.5 × 10 m weighing 132 kg are produced; the mat withstands pressure up to 7 atm.

Specifications

ManufacturerBentIzol — OOO “BentIzol”, Vvedenskoye
Typebentonite waterproofing
Usefoundations and basements, tunnels and metro, roofs, tanks and pools, hydraulic structures and dams
Basegeosynthetic roll material: needle-punched carrier of woven (160 µm) and nonwoven (200 µm) polypropylene with sodium bentonite granules (5.0 kg/m²)
Packagingrolls 1.15 × 5 m without a core on wooden pallets (35 rolls per pallet, stretch film) and 2.5 × 10 m on a core in a sealed polyethylene sleeve with lifting slings; also 5.0 × 40 m; roll weight, kg: 31 (1.15×5 m); 132 (2.5×10 m)
Application methodthe base may be damp, puddles and standing water are not permitted; on vertical surfaces “black side to the structure”: onto a finished structure — with plate dowels, dowels with press washers or powder-actuated fastening through a metal strip; to the inner side of the outer timber formwork — with a stapler or fastening gun, leaving at least 30 cm outside the formwork; along the overlaps, nails with washers at 40–50 cm spacing; on horizontal surfaces longitudinal overlap at least 15 cm, transverse at least 30 cm, stagger joints by at least 30 cm, sprinkle overlaps with bentonite granules; laminated layer facing the more aggressive side
Application temperatureinstallation at any time of year
Key propertiesmass per unit area 5,310 g/m²; permeability coefficient no more than 0.9×10⁻¹¹ m/s; flux no more than 2.0×10⁻⁹ m³/m²·s; static puncture resistance at least 2.0 kN; tensile load at least 12 / 7 kN/m; elongation at break at least 20 / 10 % (longitudinal/transverse); tear strength at least 400 N/m; dynamic perforation no more than Ø10 mm; thickness at 2 kPa 6.5 mm; bond strength to concrete when cast together at least 0.17 MPa; flexibility down to −70 °C without damage; chemical resistance pH 4–11; withstands hydrostatic pressure up to 7 atm; works in fresh water, saline, alkaline and acidic solutions; unlimited service life
Layer thicknessthickness at a pressure of 2 kPa 6.5 mm
Shelf liferecommended storage period 2 years from the date of manufacture; in covered warehouses or under sheds, protected from moisture, sun, mechanical and chemical damage
StandardsSTO 87299967.004-2021 “Geosynthetic bentonite roll materials of the MASTERBENT® type”; GOST R certificate of conformity; environmental compliance certificate; seismic resistance certificate; fire safety certificate; QMS GOST ISO 9001:2015; ITB certificate (Poland); opinion of TsNIIS, Research Centre “Tunnels and Metros”

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by BentIzol