Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
BentIzol® SB L 4 bentonite mat — laminated bentonite liner
BentIzol

BentIzol® SB L 4 bentonite mat — laminated bentonite liner

Bentonite waterproofing

The laminated SB L 4 combines natural sodium bentonite with a polyethylene film that faces the more aggressive side during installation, so it is impermeable and resistant to media with pH from 1 to 13. Film peel strength is at least 360 N/m, static puncture at least 2.2 kN, operating temperature from −70 to +60 °C. The mat is designed for liners of sludge pits, tank farms, landfills and hydraulic structures and can be installed at any time of year.

Specifications

ManufacturerBentIzol — OOO “BentIzol”, Vvedenskoye
Typebentonite waterproofing
Usehydraulic structures and dams, tanks and pools
Basegeosynthetic roll material: needle-punched carrier of woven (160 µm) and nonwoven (200 µm) polypropylene with bentonite granules (natural sodium bentonite); laminated with 180 µm polyethylene film; polymer additives are not permitted
Packagingroll 5 × 40 m, weight 916 kg; on a core in a sealed polyethylene film sleeve
Application methodcompact the base or embankment and clear it of debris, stones and vegetation; unroll the roll with the “black side” down; longitudinal overlap at least 15 cm, transverse at least 30 cm, stagger transverse joints by at least 30 cm; spread bentonite granules evenly in the overlap, about 0.5 kg per linear m; protective cover layer at least 30 cm; laminated layer facing the more aggressive side, overlaps “mat to mat”, “film to film”; on slopes steeper than 1/4–1/5 (depending on soil type) — a cellular geogrid with anchors through the mat, sprinkle puncture points with granules; on vertical surfaces — construction stapler, fastening gun
Application temperatureinstallation in any season at any temperature
Key propertiesbentonite content 4.0 kg/m²; mass per unit area 4,490 g/m²; permeability coefficient no more than — (impermeable) m/s; flux no more than — (impermeable) m³/m²·s; static puncture resistance at least 2.2 kN; tensile load at least 12 (longitudinal) / 7 (transverse) kN/m; tear strength at least 400 N/m; peel strength of the laminating layer at least 360 N/m; dynamic perforation (cone drop) no more than Ø10 mm; thickness at 2 kPa 5.9 mm; flexibility down to −70 °C without damage; resistance to aggressive media pH 1–13; withstands hydrostatic pressure up to 7 atm; service from −70 to +60 °C; self-healing of punctures and cuts; unlimited service life
Layer thicknessthickness at a pressure of 2 kPa 5.9 mm
Shelf liferecommended storage period no more than two years from the date of manufacture; in covered warehouses or under sheds, protected from moisture, sun, mechanical and chemical damage; no more than 5 rolls high
StandardsSTO 87299967.003-2022 “Geosynthetic bentonite roll materials of the BentIzol® type. Specifications”; GOST R certificate of conformity; environmental compliance certificate; seismic resistance certificate; QMS GOST ISO 9001:2015; ITB certificate (Instytut Techniki Budowlanej, Poland); opinion of NIIES (RusHydro); opinion of the K.D. Pamfilov AKKh (Academy of Municipal Economy)

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by BentIzol