OGNEZA-PO-D dry fire and bio-protective impregnation
Concentrate for preparing a fire and bio-protective timber impregnation: groups I and II per GOST R 53292, for use indoors and outdoors without precipitation.

A wall with an additional partition and an air gap is a special case, and the telescopic OGNEZA-PM(V)-T collar was made for it. It consists of a perforated fixed collar and a movable steel sleeve; inside are an OGNEZA-TRM insert, a seal and lamellae. The collar is designed for ventilation ducts from 125 to 240 mm in diameter, and the fire resistance rating is at least EI 180. Size selection and accompanying documents are available on request.
| Manufacturer | OGNEZA — OOO “OGNEZA”, St Petersburg |
|---|---|
| Fire protection performance | at least EI 180 |
| Application | air ducts, penetrations and joints |
| Service conditions | ventilation ducts 125–240 mm in walls with an additional partition and an air gap |
| Base | perforated fixed collar + movable steel sleeve, OGNEZA-TRM insert, seal, lamellae |
| Packaging | sizes from 125 to 240 mm |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Concentrate for preparing a fire and bio-protective timber impregnation: groups I and II per GOST R 53292, for use indoors and outdoors without precipitation.
Fire collar with lamellae for plastic ventilation ducts with an internal diameter of 125–240 mm; fire resistance rating at least EI 180.
Self-adhesive intumescent tape for fire doors, hatches, dampers and air duct flanges; up to EI 240 as part of an assembly.
Self-priming fire-retardant varnish for timber, including parquet and facades: groups I and II, G1, V1, D2, T2, RP1, UV resistance.
Acrylic intumescent sealant for cable penetrations and joints in walls and floors; TR EAEU 043/2017 certificates for 60 and 150 minutes.
Water-soluble fire and bio-protective impregnation for timber indoors and outdoors without direct precipitation; groups I and II per GOST R 53292.