OGRAX
OGRAX-KSK-A fire protection system (OGRAX-T + OGRAX-MSK)
Weather-resistant two-layer fire protection for steel, R90–R120: OGRAX-T thermal fire-insulating layer and OGRAX-MSK intumescent paint.
Price on request
OGRAX
OGRAX-L1 roll-type fire protection for cables
OGRAX-L1 is “dry” cable fire protection: instead of paint, it uses a flexible roll material based on rubber and mineral fillers applied to fibreglass fabric. It is wound around armoured, contaminated and flood-prone cables, as well as cables with bitumen braiding — coated side out, with overlapping joints and fixed with clamping devices. The material works at humidity up to 100% and outdoors, from −50 to +60 °C; compliance with GOST R 53311-2009 is confirmed by a certificate. The service life is at least 25 years, and the shelf life is 2 years.
Specifications
| Manufacturer | OGRAX — GK Unihimtek, Moscow Region |
|---|---|
| Fire protection performance | complies with GOST R 53311-2009 (TR EAEU 043/2017 certificate) |
| Application | cable lines |
| Service conditions | high humidity (up to 100%) and outdoors, from −50 to +60 °C; armoured, contaminated and flood-prone cables, cables with bitumen braiding |
| Base | flexible intumescent roll material based on rubber and mineral fillers on fibreglass fabric |
| Colour | black |
| Packaging | rolls up to 0.9 m wide, 10.5 or 15.9 m long |
| Application method | wound coated side out, with joint overlaps of at least 10 mm, fixed with clamping devices |
| Shelf life | 2 years |
| Standards | TU 5728-031-13267785-03 with Amendment 1; GOST R 53311-2009; TR EAEU 043/2017 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by OGRAX
OGRAX
OGRAX-TS epoxy fire protection coating
Two-component epoxy fire protection for steel in the open atmosphere and extremely aggressive environments, R45–R120, hydrocarbon fire.
Price on request
OGRAX
OGRAX-Ch epoxy fire protection coating
Two-component epoxy coating for fire protection of steel in open industrial atmospheres (C5), suitable for hydrocarbon fire conditions.
Price on request
OGRAX
OGRAX-V1 fire protection coating for cables
Water-based intumescent coating for cables with PE, PVC and rubber sheaths in enclosed premises; complies with GOST R 53311-2009.
Price on request
OGRAX
OGRAX-KP cable penetration seals
Permanent cable penetration seal of mineral wool boards and OGRAX-VV compound for walls and floors; fire resistance up to 90 minutes.
Price on request
OGRAX
OGRAX-VV fire protection coating for cables (moisture-resistant)
Moisture-resistant water-based coating for fire protection of category A and B cables in cable structures and outdoors; GOST R 53311-2009.
Price on request