OGRAX
OGRAX-KP cable penetration seals
Permanent cable penetration seal of mineral wool boards and OGRAX-VV compound for walls and floors; fire resistance up to 90 minutes.
Price on request
OGRAX
OGRAX-VV fire protection coating for cables (moisture-resistant)
Unlike OGRAX-V1, OGRAX-VV is moisture-resistant: it is used in premises and cable structures with humidity up to 100% and outdoors, from −50 to +60 °C. It protects category A and B cables laid singly and in bundles. The base is a water-polymer dispersion with mineral and organic fillers; the colour is grey. Compliance with GOST R 53311-2009 is confirmed by a TR EAEU 043/2017 certificate; the service life of the coating is 40 years. The same compound is used in OGRAX-KP cable penetration seals.
Specifications
| Manufacturer | OGRAX — GK Unihimtek, Moscow Region |
|---|---|
| Fire protection performance | complies with GOST R 53311-2009 (TR EAEU 043/2017 certificate) |
| Application | cable lines |
| Service conditions | premises and cable structures with humidity up to 100% and outdoors, from −50 to +60 °C; category A and B cables, single and in bundles |
| Base | water-polymer dispersion with mineral and organic fillers, moisture-resistant |
| Colour | grey |
| Packaging | metal containers with tight-fitting lids |
| Application method | airless spray in layers, roller, brush |
| Application temperature | not below +5 °C, RH ≤ 85% |
| Drying | between coats 6–10 h, full 10–15 days |
| Shelf life | 1 year; freezing not permitted |
| Standards | TU 5728-026-13267785-03; GOST R 53311-2009; TR EAEU 043/2017 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by OGRAX
OGRAX
OGRAX-NSh fire protection plaster
Non-combustible low-density plaster mix for fire protection of steel structures indoors, up to 240 minutes.
Price on request
OGRAX
OGRAX-TS epoxy fire protection coating
Two-component epoxy fire protection for steel in the open atmosphere and extremely aggressive environments, R45–R120, hydrocarbon fire.
Price on request
OGRAX
OGRAX-LTU fire protection tape
Extruded tape of oxidised graphite and PVC with an adhesive transfer layer; 90 minutes of protection against the passage of gases, flame and smoke.
Price on request
OGRAX
OGRAX-L3 tape-type fire collars
Intumescent tape on silica fabric for fire protection of plastic pipes inside walls and floors; EI 180.
Price on request
OGRAX
OGRAX-V1 fire protection coating for cables
Water-based intumescent coating for cables with PE, PVC and rubber sheaths in enclosed premises; complies with GOST R 53311-2009.
Price on request