The one-component Primer 210 based on an organic prepolymer penetrates deep into concrete and can work on its own — as a dustproofing and hardening coating for mineral substrates — or as a primer under TAIKOR Elastic 300 waterproofing. The coating is functional, not decorative. It is applied in one coat by brush, roller or spraying, including at sub-zero air temperatures down to −10 °C. Adhesion to concrete at least 2 MPa, water impermeability at least 16 atm, no chloride penetration, service from −40 to +90 °C.
| Manufacturer | TAIKOR (TECHNONICOL) — OOO “TECHNONICOL – Construction Systems” |
|---|---|
| Type | floor primers |
| Use | production workshops, retail and public, wet premises |
| Base | one-component deep-penetrating primer based on an organic prepolymer; non-volatiles 49-51 % |
| Colour | clear, light yellow |
| Packaging | net weight 16 kg |
| Application method | on its own — dustproofing and hardening of mineral substrates (TN-POL TAIKOR Light system); primer under TAIKOR Elastic 300 waterproofing; brush, roller, spraying, 1 coat to a slight gloss; mix at no more than 150 rpm; substrate moisture no more than 4 % |
| Application temperature | air -10…+35 °C (per TI-POL-26 +5…+35 °C is recommended, lower — by agreement with the manufacturer) |
| Curing | interval before the next coating 3-24 h; light load at least 72 h, full load at least 7 days at (20±2) °C |
| Key properties | Adhesion to concrete at least 2 MPa; chloride permeability — none; CO2 permeability 0.14·10-4 cm2/s; water impermeability at least 16 atm; service temperature -40…+90 °C, temporarily up to +180 °C; density 0.97-0.99 kg/l; with Elastic 300: V1, D2, T2, RP1 |
| Consumption | mineral substrates 0.200-0.300 kg/m2; in the TN-POL TAIKOR Light system 0.200-0.600 kg/m2 |
| Shelf life | 12 months; storage and transport -35…+35 °C |
| Standards | STO 72746455-3.6.1-2015; methods GOST 31383, GOST 28574; TN VED EAEU 3208 90 9109 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Epoxy primer without a strong odour for TAIKOR Floor self-levelling floors and a binder for repair compounds; adhesion to concrete from 2 MPa.
One-component matt primer-enamel for economical painting of concrete floors with light and moderate loads, as well as metal; application from −30 °C.
Epoxy primer-enamel for thin-layer polymer floors in car parks, warehouses and cold stores, as well as steel; application from −10 °C.
Antistatic polyurethane floor system with copper tape and TAIKOR Floor 720 AS for explosion-hazard production, electronics and filling stations; up to 10⁶ Ω.
Polyurethane self-levelling floor system based on TAIKOR Primer 160 and Floor 720 for offices, medicine, schools, warehouses and open car parks.
Impregnation of a concrete floor with TAIKOR Primer 210 for dustproofing and hardening; all-season application at temperatures from −10 to +35 °C.
